{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BCR 148S H6827","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"BCR-148S-H6827","canonicalUrl":"https://icboms.com/infineon/BCR-148S-H6827","factsUrl":"https://icboms.com/api/mcp/products/BCR%20148S%20H6827","rawCanonicalId":null},"summary":{"shortDescription":"Infineon BCR 148S H6827, dual NPN pre-biased transistor, 50V Vce, 100mA Ic, 100MHz ft, SOT-363 package, Tape & Reel.","salesMarkdown":"## What is the BCR 148S H6827 and what does it do? The Infineon BCR 148S H6827 is a dual NPN pre-biased transistor array in a SOT-363 package. Each transistor integrates two 47 kΩ resistors — one in series with the base, one from base to emitter — so you can switch loads up to 100 mA collector current without external bias resistors. The 50 V collector-emitter breakdown and 100 MHz transition frequency cover general-purpose low-side switching in industrial control, relay drivers, and logic-level interface circuits. This part is listed as obsolete. Infineon no longer manufactures the BCR 148S H6827, so new production orders are not available through the factory channel. ## Rework note on the SOT-363 package The SOT-363 (SC-88) package is a 6-lead surface-mount body about 2.0 × 2.1 mm. The low thermal mass means it lifts without cooking the board if you preheat the PCB to 100 °C. Tape & Reel delivery is standard, so kitting for volume reflow is straightforward.","metaTitle":"BCR 148S H6827 dual NPN pre-biased transistor, 50V, 100mA","metaDescription":"Infineon BCR 148S H6827 dual NPN pre-biased transistor, 50V Vce, 100mA Ic, 100MHz ft, SOT-363.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Discrete Semiconductors"],"specifications":{"Mfr":"Infineon Technologies","Series":"-","Package":"Tape & Reel (TR)","Power - Max":"250mW","Mounting Type":"Surface Mount","Package / Case":"6-VSSOP, SC-88, SOT-363","Product Status":"Obsolete","Transistor Type":"2 NPN - Pre-Biased (Dual)","lifecycle_stage":"eol_hot","Base Product Number":"BCR 148","Resistor - Base (R1)":"47kOhms","Frequency - Transition":"100MHz","Supplier Device Package":"PG-SOT363-PO","Resistor - Emitter Base (R2)":"47kOhms","Vce Saturation (Max) @ Ib, Ic":"300mV @ 500µA, 10mA","Current - Collector (Ic) (Max)":"100mA","Current - Collector Cutoff (Max)":"-","DC Current Gain (hFE) (Min) @ Ic, Vce":"70 @ 5mA, 5V","Voltage - Collector Emitter Breakdown (Max)":"50V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.4100","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/48b524a21f70ba87148fe966031e06a7.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the replacement for BCR 148S H6827?","answer":"No official replacement part number is recorded for the BCR 148S H6827. Any substitute must be evaluated for pin-compatibility and electrical fit on your board. The dual NPN pre-biased transistor function is common, so a same-package part from the BCR 148 family with matching 47 kΩ base and emitter resistors may work, but you will need to verify the pinout and ratings against your design."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/BCR-148S-H6827","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/BCR-148S-H6827 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}