{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BCR 116S H6727","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"BCR-116S-H6727","canonicalUrl":"https://icboms.com/infineon/BCR-116S-H6727","factsUrl":"https://icboms.com/api/mcp/products/BCR%20116S%20H6727","rawCanonicalId":null},"summary":{"shortDescription":"Infineon BCR 116S H6727, dual NPN pre-biased transistor array, 50V VCEO, 100mA IC, 150MHz fT, R1=4.7kΩ, R2=47kΩ, PG-SOT363-PO package, surface mount.","salesMarkdown":"## Dual NPN pre-biased transistor in a 6-pin SOT-363 The Infineon BCR 116S H6727 integrates two NPN transistors with built-in bias resistors in a single PG-SOT363-PO package. Each transistor has a base resistor (R1) of 4.7kΩ and a base-emitter resistor (R2) of 47kΩ, eliminating the need for external biasing components in low-current switching applications. Rated for a collector current of 100mA and a collector-emitter breakdown voltage of 50V, with a transition frequency of 150MHz. The 250mW power dissipation limit applies to the total package, not per transistor. The surface-mount SOT-363 footprint suits automated assembly in consumer, industrial, and automotive auxiliary circuits. The 50V collector-emitter breakdown covers 12V and 24V industrial rails with derating margin, but is not suitable for 48V systems where a 60V or 80V part would be needed. The 100mA continuous collector current is adequate for driving small relays, optocoupler LEDs, and logic-level loads; for loads above 80mA, check the saturation voltage at 300mV at 10mA to confirm headroom. The integrated 4.7kΩ base resistor and 47kΩ base-emitter resistor set a fixed base current for a given input voltage — typically 5V logic yields about 0.9mA base drive, which with a minimum hFE of 70 at 5mA gives enough collector current for the rated 100mA. No external base resistor is needed, saving one component per transistor.","metaTitle":"Infineon BCR 116S H6727 dual NPN pre-biased transistor, 50V","metaDescription":"Infineon BCR 116S H6727 dual NPN pre-biased transistor array. 50V VCEO, 100mA IC, 150MHz fT. Integrated bias resistors R1=4.7kΩ, R2=47kΩ. PG-SOT363-PO package.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"Mfr":"Infineon Technologies","Series":"-","Package":"Tape & Reel (TR)","Power - Max":"250mW","Mounting Type":"Surface Mount","Package / Case":"6-VSSOP, SC-88, SOT-363","Transistor Type":"2 NPN - Pre-Biased (Dual)","lifecycle_stage":"eol_hot","Base Product Number":"BCR 116","Resistor - Base (R1)":"4.7kOhms","Frequency - Transition":"150MHz","Supplier Device Package":"PG-SOT363-PO","Resistor - Emitter Base (R2)":"47kOhms","Vce Saturation (Max) @ Ib, Ic":"300mV @ 500µA, 10mA","Current - Collector (Ic) (Max)":"100mA","Current - Collector Cutoff (Max)":"-","DC Current Gain (hFE) (Min) @ Ic, Vce":"70 @ 5mA, 5V","Voltage - Collector Emitter Breakdown (Max)":"50V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.4100","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://www.infineon.com/dgdl/bcr116series.pdf?folderId=db3a30431400ef68011406f3ddb1012e&fileId=db3a30431428a37301143f60ae880285","sourceUrl":null},"ai":{"faq":[{"question":"Can BCR 116S H6727 be used as a replacement for BCR 116?","answer":"The BCR 116S H6727 shares the same base product number (BCR 116) and the same integrated resistor values (R1=4.7kΩ, R2=47kΩ). The 'S' suffix typically indicates a specific package variant or tape-and-reel configuration. For a direct pin-compatible replacement, verify the package footprint against your board — the PG-SOT363-PO is the standard SOT-363 outline."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/BCR-116S-H6727","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/BCR-116S-H6727 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}