{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"AM26LV32EMDREP","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"AM26LV32EMDREP","canonicalUrl":"https://icboms.com/texas-instruments/AM26LV32EMDREP","factsUrl":"https://icboms.com/api/mcp/products/AM26LV32EMDREP","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments AM26LV32EMDREP, RS422/RS485 Receiver, 0/4 Drivers/Receivers, 3V to 3.6V Supply, 35 mV Hysteresis, -55°C to 125°C, 16-SOIC (0.154\", 3.90mm Width), Surface Mount.","salesMarkdown":"## Quad RS422/RS485 receiver for 3.3V differential buses The AM26LV32EMDREP: It provides four independent receivers in a single 16-SOIC package, each with 35 mV of hysteresis for noise rejection on long cable runs. For defense and aerospace BOMs that require a guaranteed receiver over the entire Mil-Std temperature span, this part fits without derating. The 16-SOIC package is surface-mount, so board assembly follows standard JEDEC profiles, but the die and package materials are qualified for the extended range.","metaTitle":"TI AM26LV32EMDREP RS422/RS485 Receiver, -55°C to 125°C","metaDescription":"Texas Instruments AM26LV32EMDREP quad RS422/RS485 receiver in 16-SOIC. 3V to 3.6V supply, 35 mV hysteresis, -55°C to 125°C range.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Interface & Transceivers"],"specifications":{"Mfr":"Texas Instruments","Type":"Receiver","Duplex":"-","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Protocol":"RS422, RS485","Data Rate":"-","Mounting Type":"Surface Mount","Package / Case":"16-SOIC (0.154\\\", 3.90mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Voltage - Supply":"3V ~ 3.6V","Base Product Number":"AM26LV32","Receiver Hysteresis":"35 mV","Operating Temperature":"-55°C~125°C","Supplier Device Package":"16-SOIC","Number of Drivers/Receivers":"0/4"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$6.7200","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/d79e3c844fbce7d5bc3f2a4c54957f57.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/AM26LV32EMDREP/alternatives.json"},"ai":{"faq":[{"question":"What is the difference between AM26LV32 and AM26LV32E?","answer":"The AM26LV32E variant includes enhanced ESD protection on the bus pins compared to the base AM26LV32. The 'E' suffix parts are preferred for applications where the cable interface is exposed to electrostatic discharge events. Both are quad RS422/RS485 receivers with the same pinout and supply range."},{"question":"Is AM26LV32EMDREP compatible with 5V systems?","answer":"The supply voltage is 3V to 3.6V, so the VCC pin must connect to a 3.3V rail. The receiver inputs are designed for RS422/RS485 differential signals with a common-mode range that can accommodate 5V bus voltages, but the part itself is not a 5V-logic device. Level translation on the logic-side outputs may be needed if the downstream UART or controller runs at 5V."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/AM26LV32EMDREP","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/AM26LV32EMDREP when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}