{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"AM26LV32EIDR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"AM26LV32EIDR","canonicalUrl":"https://icboms.com/texas-instruments/AM26LV32EIDR","factsUrl":"https://icboms.com/api/mcp/products/AM26LV32EIDR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments AM26LV32EIDR, Type Receiver, Protocol RS422, RS485, Supply 3V~3.6V, Hysteresis 35 mV, 0/4 Drivers/Receivers, -40°C~85°C, 16-SOIC, Tape & Reel.","salesMarkdown":"It takes the four balanced inputs and delivers single-ended TTL/CMOS-compatible outputs to the UART or controller. The 35 mV of built-in hysteresis cleans up noisy bus signals without external Schmidt triggers — useful on long cable runs or in electrically noisy factory-floor environments. ## 3V-only rail — no 5V tolerance The narrow supply window also means a 3.3V rail needs to stay within regulation; a 3.0V LDO with 2% tolerance is fine, but a dropping 3.3V rail that sags below 3.0V during a transient will drop the receiver out of spec. ## No driver on board — receiver only With 0 drivers and 4 receivers, the AM26LV32EIDR is a pure receive-side device. For a full RS-485 node you pair it with a separate driver or a transceiver like the SN65HVD3082E. The all-receiver configuration is common in star-topology receive concentrators or where the transmit path is handled by a different voltage domain. The base product number AM26LV32 covers a family of quad receivers with different temperature grades and package options, so if a future design needs a wider temperature range or a different footprint, a sibling variant exists without a full requalification. ## 16-SOIC — rework-friendly footprint It reworks cleanly with hot air or a soldering iron — no hidden pads, no thermal pad underneath.","metaTitle":"TI AM26LV32EIDR RS-422/RS-485 Receiver, 16-SOIC, 3V–3.6V","metaDescription":"Texas Instruments AM26LV32EIDR quad RS-422/RS-485 receiver in 16-SOIC. 35 mV hysteresis, 3V–3.6V supply, -40°C to 85°C. Active lifecycle.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Interface & Transceivers"],"specifications":{"Mfr":"Texas Instruments","Type":"Receiver","Duplex":"-","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Protocol":"RS422, RS485","Data Rate":"-","Mounting Type":"Surface Mount","Package / Case":"16-SOIC (0.154\\\", 3.90mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Voltage - Supply":"3V ~ 3.6V","Base Product Number":"AM26LV32","Receiver Hysteresis":"35 mV","Operating Temperature":"-40°C~85°C","Supplier Device Package":"16-SOIC","Number of Drivers/Receivers":"0/4"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.8200","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/d854d7510ed4b483119ba45dfd73e999.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/AM26LV32EIDR/alternatives.json"},"ai":{"faq":[{"question":"What is the closest pin-compatible alternative to AM26LV32EIDR?","answer":"Within the same base product family (AM26LV32), pin-compatible variants differ by temperature grade and package. No exact 5V-tolerant pin-compatible receiver exists — the AM26LV32 family is 3V-only."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/AM26LV32EIDR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/AM26LV32EIDR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}