{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"AIKW50N65DF5XKSA1","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"AIKW50N65DF5XKSA1","canonicalUrl":"https://icboms.com/infineon/AIKW50N65DF5XKSA1","factsUrl":"https://icboms.com/api/mcp/products/AIKW50N65DF5XKSA1","rawCanonicalId":null},"summary":{"shortDescription":"Infineon Trenchstop™ 5, AIKW50N65DF5XKSA1, 650 V, 50 A IGBT, Trench, Standard input, 1018 nC gate charge, 270 W, TO-247-3, AEC-Q101, -40°C to 175°C.","salesMarkdown":"## What the 650 V / 50 A rating buys you in a traction inverter The Infineon AIKW50N65DF5XKSA1 is a 650 V, 50 A Trenchstop™ 5 IGBT in a TO-247-3 through-hole package, qualified to AEC-Q101 and rated for a 175°C junction temperature. It targets hard-switched traction inverters, on-board chargers, and DC-DC converters in hybrid and electric vehicles where the DC-link sits at 400 V nominal. The 650 V breakdown gives about 250 V of headroom above a 400 V bus — enough for typical load-dump and switching overshoot without derating into the next voltage class. ## Switching loss budget at 20–50 kHz Under the test condition of 400 V, 25 A, 12 Ω gate resistance, and 15 V gate drive, the part switches 490 µJ during turn-on and 140 µJ during turn-off. That asymmetry — roughly 3.5:1 — is typical for a Trench IGBT optimised for low Vce(on), and it means the turn-on loss dominates the total. A designer budgeting for a 20 kHz PWM rate should plan for roughly 12.6 W of switching loss per device at that operating point, before factoring in the gate-driver's 1018 nC charge requirement. The 21 ns turn-on delay and 156 ns turn-off delay are tight enough for dead-time compensation in a typical motor-control loop. ## Automotive-grade qualification — what AEC-Q101 means on the shop floor This part carries an Automotive grade label and AEC-Q101 qualification. The ROHS3 compliance is confirmed in the lifecycle record. Lifecycle status is Active, so no NRND or last-time-buy horizon is on the table for production planning. ## Package and thermal path The PG-TO247-3-41 package is a standard TO-247-3 outline with a fully isolated tab. The 270 W power dissipation rating assumes the case is held at 25°C — in a real 85°C coolant loop, derate that to roughly 170 W using the junction-to-case thermal resistance typical of the package. Through-hole mounting suits a bolted heatsink interface; the large copper tab carries the bulk of the dissipation.","metaTitle":"Infineon AIKW50N65DF5XKSA1 Trenchstop 5 IGBT, 650 V, 50 A","metaDescription":"Infineon AIKW50N65DF5XKSA1 Trenchstop 5 IGBT, 650 V, 50 A, AEC-Q101 qualified, 175°C Tj, 490 µJ / 140 µJ switching energy. Active production.","metaKeywords":null},"attributes":{"series":"Trenchstop™ 5","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Grade":"Automotive","Series":"Trenchstop™ 5","Package":"Tube","IGBT Type":"Trench","Input Type":"Standard","Gate Charge":"1018 nC","Power - Max":"270 W","Mounting Type":"Through Hole","Qualification":"AEC-Q101","Package / Case":"TO-247-3","Test Condition":"400V, 25A, 12Ohm, 15V","lifecycle_stage":"eol_hot","Switching Energy":"490µJ (on), 140µJ (off)","Td (on/off) @ 25°C":"21ns/156ns","Operating Temperature":"-40°C ~ 175°C (TJ)","Supplier Device Package":"PG-TO247-3-41","Vce(on) (Max) @ Vge, Ic":"2.1V @ 15V, 50A","Current - Collector Pulsed (Icm)":"150 A","Voltage - Collector Emitter Breakdown (Max)":"650 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$9.16","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$9.16000","currency":"USD"},{"qty":10,"price":"$8.27600","currency":"USD"},{"qty":25,"price":"$7.89080","currency":"USD"},{"qty":100,"price":"$6.85140","currency":"USD"},{"qty":250,"price":"$6.54348","currency":"USD"},{"qty":500,"price":"$5.96612","currency":"USD"},{"qty":1000,"price":"$5.19630","currency":"USD"}]},"links":{"datasheetUrl":"https://www.infineon.com/dgdl/Infineon-AIKW50N65DF5-DS-v02_01-EN.pdf?fileId=5546d4625cc9456a015d081326247f3a","sourceUrl":null},"ai":{"faq":[{"question":"Will AIKW50N65DF5XKSA1 drop into a panel specified around IHW30N120R5XKSA1?","answer":"No. The IHW30N120R5XKSA1 is a 1200 V / 30 A device with a different gate charge (235 nC) and switching energy profile. Although both are TO-247-3, the AIKW50N65DF5XKSA1 is a 650 V / 50 A part optimised for a lower-voltage, higher-current application. The drive and loss calculations differ significantly; a board designed for the 1200 V part would need re-verification of the gate-driver and snubber."},{"question":"What compliance documentation does Infineon provide for this part?","answer":"The part is ROHS3 compliant. For PPAP, AEC-Q101 qualification data, and REACH declarations, these are typically available from Infineon upon request through your sourcing channel."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/AIKW50N65DF5XKSA1","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/AIKW50N65DF5XKSA1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}