{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ADUM6200ARWZ","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"ADUM6200ARWZ","canonicalUrl":"https://icboms.com/analog-devices/ADUM6200ARWZ","factsUrl":"https://icboms.com/api/mcp/products/ADUM6200ARWZ","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices ADUM6200ARWZ, IsoPower® iCoupler® series, General Purpose digital isolator, 2-channel unidirectional, 1Mbps data rate, 5000Vrms isolation, 25kV/µs CMTI, 3V-5.5V supply, -40°C to 105°C, 16-SOIC package.","salesMarkdown":"This means the part provides both signal isolation and an isolated power output from a single 16-SOIC package, eliminating the need for a separate isolated supply module on the BOM. It uses magnetic coupling technology and is rated for 5000Vrms isolation — a figure that qualifies it for reinforced insulation in medical (IEC 60601) and industrial applications where galvanic isolation is a safety requirement. The two channels are configured with both inputs on side 1 (2/0 input-side/side-2 ratio), so this variant is for signals flowing in one direction only — from the primary-side supply domain to the isolated secondary side. Data rate is specified at 1Mbps maximum, with 100ns propagation delay and 40ns pulse-width distortion, which suits moderate-speed control signals, SPI-like interfaces up to 1 MHz, and general-purpose isolation of digital I/O lines. The supply range spans 3V to 5.5V on both sides, so it can interface directly with 3.3V or 5V logic without level translation. ## IsoPower: what the integrated isolated supply means for the BOM The key differentiator of the ADUM6200ARWZ versus a plain digital isolator is the integrated IsoPower DC-DC converter. Instead of routing a separate isolated 5V or 3.3V supply from a discrete transformer-and-rectifier stage, the part generates its own isolated output voltage from the input-side supply. This collapses a multi-component power-isolation stage into a single IC, saving board area and reducing procurement complexity. The trade-off is that the isolated power output is limited in current — the ADUM6200ARWZ is designed for the isolator's own secondary-side circuitry and light auxiliary loads, not for powering an entire isolated domain. For designs that need more secondary-side current, the ADuM620x family offers higher-drive variants. ## CMTI and propagation delay — the margin-critical specs Common-mode transient immunity is specified at a minimum of 25kV/µs. This is the part's ability to reject fast voltage transients between the input and output grounds — a critical parameter in motor-drive and inverter stages where IGBT or SiC switching edges can inject several kV/µs of common-mode noise across the isolation barrier. A CMTI below the transient slew rate will cause data corruption or output glitches. The 25kV/µs floor here is sufficient for most industrial drives operating at moderate switching frequencies; for SiC-based designs with edge rates exceeding 50kV/µs, a higher-CMTI isolator should be evaluated. Propagation delay is 100ns maximum in both directions, with a 40ns pulse-width distortion maximum. These numbers define the timing budget for the isolated path. At 1Mbps (1µs bit period), 100ns represents 10% of the bit time — acceptable for most control and status signals, but tight for high-speed synchronous interfaces where setup-and-hold margins are already constrained. The 2.5ns typical rise/fall time keeps the output edge clean and reduces the risk of signal-integrity issues on short traces. ## Package and footprint — 16-SOIC wide-body The wide-body SOIC provides the creepage distance needed to sustain the 5000Vrms isolation rating — the narrower SOIC-8 or SOIC-16 narrow-body packages cannot achieve this isolation level. For PCB layout, the standard SOIC-16 wide-body footprint applies; no exposed thermal pad is present, so thermal dissipation is through the leads and the board copper.","metaTitle":"ADUM6200ARWZ Digital Isolator, 5000Vrms, 1Mbps, 16-SOIC","metaDescription":"ADI ADUM6200ARWZ dual-channel digital isolator with integrated IsoPower isolated DC-DC converter. 5000Vrms isolation, 1Mbps data rate, -40°C to 105°C.","metaKeywords":null},"attributes":{"series":"IsoPower®, iCoupler®","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Digital Isolators"],"specifications":{"Type":"General Purpose","Series":"IsoPower®, iCoupler®","Package":"Tube","Data Rate":"1Mbps","Technology":"Magnetic Coupling","Channel Type":"Unidirectional","Mounting Type":"Surface Mount","Isolated Power":"Yes","Package / Case":"16-SOIC (0.295\\\", 7.50mm Width)","lifecycle_stage":"eol_hot","Voltage - Supply":"3V ~ 5.5V","Number of Channels":"2","Voltage - Isolation":"5000Vrms","Operating Temperature":"-40°C ~ 105°C","Inputs - Side 1/Side 2":"2/0","Rise / Fall Time (Typ)":"2.5ns, 2.5ns","Supplier Device Package":"16-SOIC","Pulse Width Distortion (Max)":"40ns","Propagation Delay tpLH / tpHL (Max)":"100ns, 100ns","Common Mode Transient Immunity (Min)":"25kV/µs"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$14.88","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$14.88000","currency":"USD"},{"qty":10,"price":"$11.22400","currency":"USD"},{"qty":100,"price":"$9.42780","currency":"USD"},{"qty":500,"price":"$8.65822","currency":"USD"},{"qty":1000,"price":"$8.17721","currency":"USD"}]},"links":{"datasheetUrl":"https://www.analog.com/media/en/technical-documentation/data-sheets/ADuM6200_6201_6202.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the maximum data rate supported by ADUM6200ARWZ?","answer":"The maximum data rate is 1Mbps. This is the signaling rate for each channel; the 100ns propagation delay and 40ns pulse-width distortion define the timing margin at that rate."},{"question":"ADUM6200ARWZ vs ADuM6201: what is the difference?","answer":"The ADuM6201 is a higher-data-rate variant in the same IsoPower family, supporting 25Mbps versus the ADUM6200ARWZ's 1Mbps. Both share the same 5000Vrms isolation, 16-SOIC package, and integrated isolated power. The ADUM6200ARWZ is the lower-speed, lower-cost option for control and status signals; the ADuM6201 is the choice when the isolated channel must carry faster SPI or UART traffic."},{"question":"Does ADUM6200ARWZ provide isolated power?","answer":"Yes. The ADUM6200ARWZ integrates an IsoPower isolated DC-DC converter that generates an isolated output voltage from the input-side supply, eliminating the need for a separate isolated power module."},{"question":"What is the ADUM6200ARWZ?","answer":"The ADUM6200ARWZ is a dual-channel, unidirectional digital isolator from Analog Devices in the IsoPower and iCoupler series. It provides 5000Vrms galvanic isolation, a 1Mbps data rate, and an integrated isolated DC-DC converter, all in a 16-SOIC package. It is used for general-purpose signal isolation in industrial, medical, and telecom equipment where a reinforced isolation barrier is required."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/ADUM6200ARWZ","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/ADUM6200ARWZ when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}