{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ADUM5200ARWZ-RL","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"ADUM5200ARWZ-RL","canonicalUrl":"https://icboms.com/analog-devices/ADUM5200ARWZ-RL","factsUrl":"https://icboms.com/api/mcp/products/ADUM5200ARWZ-RL","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices ADUM5200ARWZ-RL, IsoPower®, iCoupler® series, General Purpose digital isolator, 2 channels unidirectional, 2500Vrms isolation, 1Mbps data rate, 16-SOIC (0.295\", 7.50mm Width), Surface Mount, -40°C to 105°C.","salesMarkdown":"## Isolated power and signal in one SOIC-16 package The ADUM5200ARWZ-RL from Analog Devices combines a 2500Vrms digital isolator with an integrated, isolated DC-DC converter in a single 16-SOIC package. This is the key differentiator from a plain isolator: the IsoPower block generates a regulated, isolated output voltage from the input-side supply, eliminating the need for a separate isolated DC-DC module or a third transformer winding. The part provides two unidirectional data channels at 1 Mbps, with the input-side supply accepting 3V to 5.5V and the output-side power stage requiring 4.5V to 5.5V. The 2500Vrms isolation rating is the standard for basic isolation per IEC 60950-1 and IEC 60601-1 (medical) for one-minute hipot testing. It provides a reinforced insulation barrier for mains-connected circuits up to 300V working voltage. The 25 kV/µs common-mode transient immunity (CMTI) is the critical parameter for applications with fast-switching power stages — motor drives, inverters, and switch-mode power supplies — where high dV/dt edges on the isolated side can otherwise corrupt data across the barrier. At 25 kV/µs, this part handles the switching edges of a typical IGBT or SiC MOSFET gate driver without bit errors. ## 1 Mbps data rate and 100 ns propagation delay The 1 Mbps data rate and 100 ns maximum propagation delay (tpLH / tpHL) suit this device for control signals, fault flags, enable lines, and slow serial buses like I²C (if the pull-up is on the isolated side) or UART at standard baud rates. The 40 ns maximum pulse-width distortion means the on-time and off-time are well matched, which matters for PWM signals where duty-cycle accuracy is needed. Rise and fall times are 2.5 ns typical, giving clean edges without excessive ringing. For higher-speed interfaces like SPI at 10 MHz or full-speed USB, a faster isolator family is needed.","metaTitle":"ADUM5200ARWZ-RL IsoPower Digital Isolator, 2500Vrms, 1 Mbps","metaDescription":"ADI ADUM5200ARWZ-RL digital isolator with integrated isolated DC-DC converter. 2500Vrms isolation, 1 Mbps data rate, 2 unidirectional channels, -40°C to 105°C.","metaKeywords":null},"attributes":{"series":"IsoPower®, iCoupler®","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Digital Isolators"],"specifications":{"Type":"General Purpose","Series":"IsoPower®, iCoupler®","Package":"Tape & Reel (TR); Cut Tape (CT)","Data Rate":"1Mbps","Technology":"Magnetic Coupling","Channel Type":"Unidirectional","Mounting Type":"Surface Mount","Isolated Power":"Yes","Package / Case":"16-SOIC (0.295\\\", 7.50mm Width)","lifecycle_stage":"eol_hot","Voltage - Supply":"3V ~ 5.5V, 4.5V ~ 5.5V","Number of Channels":"2","Voltage - Isolation":"2500Vrms","Operating Temperature":"-40°C ~ 105°C","Inputs - Side 1/Side 2":"2/0","Rise / Fall Time (Typ)":"2.5ns, 2.5ns","Supplier Device Package":"16-SOIC","Pulse Width Distortion (Max)":"40ns","Propagation Delay tpLH / tpHL (Max)":"100ns, 100ns","Common Mode Transient Immunity (Min)":"25kV/µs"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$6.99859","stockQuantity":0,"priceTiers":[{"qty":1000,"price":"$6.99859","currency":"USD"}]},"links":{"datasheetUrl":"https://www.analog.com/media/en/technical-documentation/data-sheets/ADuM5200_5201_5202.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is ADUM5200ARWZ-RL compatible with 3.3V logic?","answer":"Yes, on the input side. The input-side supply range is 3V to 5.5V, so 3.3V logic is directly compatible. The output-side power stage requires 4.5V to 5.5V, meaning the isolated output rail must be at least 4.5V. If the downstream circuitry runs at 3.3V, a post-regulator on the isolated output is needed."},{"question":"What are the alternatives to ADUM5200ARWZ-RL?","answer":"Within the same IsoPower family, the ADUM5211ARSZ-RL7 offers a 1/1 channel configuration (one input on each side) versus the ADUM5200's 2/0 configuration (both inputs on side 1). The ADUM5404ARWZ-RL provides four channels (0/4) and the ADUM6402ARWZ offers four channels (2/2) with 5000Vrms isolation."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/ADUM5200ARWZ-RL","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/ADUM5200ARWZ-RL when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}