{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ADUM2201BRIZ","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"ADUM2201BRIZ","canonicalUrl":"https://icboms.com/analog-devices/ADUM2201BRIZ","factsUrl":"https://icboms.com/api/mcp/products/ADUM2201BRIZ","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices ADUM2201BRIZ iCoupler, General Purpose, 2-Channel Digital Isolator, 5000 Vrms, 10 Mbps, 25 kV/µs CMTI, 16-SOIC, -40°C to 105°C, ROHS3.","salesMarkdown":"The ADUM2201BRIZ is a 2-channel, unidirectional digital isolator from Analog Devices' iCoupler series, built around magnetic coupling. Its headline rating is 5000 Vrms isolation — enough to separate a low-voltage control side from a 400 V motor-drive power stage or a medical patient-connected circuit, with a 1 mm creepage/clearance target in the 16-SOIC wide-body package. The 10 Mbps data rate handles SPI, UART, and general-purpose logic links without stretching the timing budget. ## 25 kV/µs CMTI — why it matters for motor drives and inverters Common-mode transient immunity is rated at 25 kV/µs minimum. In a motor-drive or inverter application, fast switching edges on the high-voltage side couple across the isolation barrier as common-mode noise. If the isolator's CMTI is too low, those edges can glitch the output data. 25 kV/µs is a solid industrial-grade figure — it keeps the data path clean through the worst switching transients you will see on a 600 V IGBT phase leg. ## Channel count and direction — 1/1 split Two channels, one in each direction. That is the classic configuration for an isolated SPI bus (MISO on one side, MOSI on the other) or a full-duplex UART link. The sibling ADUM2200BRWZ gives you two forward channels and zero reverse — useful if you only need to isolate a single-direction signal like a PWM command. The ADUM2402BRIZ packs four channels with a 2/2 split for wider parallel interfaces. For a two-wire bidirectional link, the 1/1 split here is the right fit.","metaTitle":"ADUM2201BRIZ iCoupler 2-Ch Digital Isolator, 5000 Vrms","metaDescription":"ADUM2201BRIZ general-purpose magnetic isolator: 5000 Vrms isolation, 10 Mbps data rate, 25 kV/µs CMTI, -40°C to 105°C. Active lifecycle, ROHS3 compliant.","metaKeywords":null},"attributes":{"series":"iCoupler®","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Digital Isolators"],"specifications":{"Type":"General Purpose","Series":"iCoupler®","Package":"Tube","Data Rate":"10Mbps","Technology":"Magnetic Coupling","Channel Type":"Unidirectional","Mounting Type":"Surface Mount","Isolated Power":"No","Package / Case":"16-SOIC (0.295\\\", 7.50mm Width)","lifecycle_stage":"eol_hot","Voltage - Supply":"3V ~ 5.5V","Number of Channels":"2","Voltage - Isolation":"5000Vrms","Operating Temperature":"-40°C ~ 105°C","Inputs - Side 1/Side 2":"1/1","Rise / Fall Time (Typ)":"2.5ns, 2.5ns","Supplier Device Package":"16-SOIC-IC","Pulse Width Distortion (Max)":"3ns","Propagation Delay tpLH / tpHL (Max)":"50ns, 50ns","Common Mode Transient Immunity (Min)":"25kV/µs"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$6.49","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$6.49000","currency":"USD"},{"qty":10,"price":"$5.82800","currency":"USD"},{"qty":25,"price":"$5.50920","currency":"USD"},{"qty":100,"price":"$4.77480","currency":"USD"},{"qty":250,"price":"$4.52992","currency":"USD"},{"qty":500,"price":"$4.06468","currency":"USD"},{"qty":1000,"price":"$3.46500","currency":"USD"}]},"links":{"datasheetUrl":"https://www.analog.com/media/en/technical-documentation/data-sheets/ADuM2200_2201.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the difference between ADUM2201BRIZ and ADUM2200BRWZ?","answer":"Both are 2-channel iCoupler isolators with the same 5000 Vrms isolation, 10 Mbps data rate, and 25 kV/µs CMTI. The ADUM2201BRIZ has one channel in each direction (1/1 split), while the ADUM2200BRWZ has both channels forward (2/0 split). Pick the 2201 for full-duplex links like SPI or UART; pick the 2200 for single-direction signals such as PWM or enable lines."},{"question":"Is ADUM2201BRIZ RoHS compliant?","answer":"Yes, the ADUM2201BRIZ is ROHS3 compliant per the manufacturer's listing."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/ADUM2201BRIZ","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/ADUM2201BRIZ when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}