{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ADUM1311ARWZ-RL","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"ADUM1311ARWZ-RL","canonicalUrl":"https://icboms.com/analog-devices/ADUM1311ARWZ-RL","factsUrl":"https://icboms.com/api/mcp/products/ADUM1311ARWZ-RL","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices iCoupler ADUM1311ARWZ-RL, General Purpose Digital Isolator, Magnetic Coupling, 3 Unidirectional Channels, 3750Vrms Isolation, 1Mbps Data Rate, 2.7V to 5.5V Supply, 16-SOIC Wide, -40°C to 105°C.","salesMarkdown":"## Three-channel unidirectional isolator for industrial signal paths The ADUM1311ARWZ-RL is a three-channel digital isolator from Analog Devices' iCoupler series, built on magnetic coupling technology rather than the older optocoupler approach. It provides 3750Vrms isolation between two power domains, with two channels passing data from Side 1 to Side 2 and one channel going the opposite direction — a 2/1 input split that suits applications like isolated SPI where you need separate lines for clock, data-in, and data-out. Rated for a 1Mbps data rate with a maximum propagation delay of 100ns and pulse width distortion of 40ns, this part is designed for general-purpose isolation of slow-to-moderate-speed digital signals — think UART, GPIO, or low-speed SPI, not high-throughput parallel buses. ## Package and mounting The 3750Vrms isolation rating is the standard for reinforced insulation in 240VAC mains-connected equipment — it passes the 60-second hipot test required for safety certifications like IEC 60950-1. For the procurement side, this means the part can be specified in power supplies, inverters, and medical devices without needing a higher-rated (and more expensive) isolator. Common-mode transient immunity of 25kV/µs (minimum) is the spec that matters when the isolator sits between a noisy power stage and a sensitive controller. In a motor drive with SiC or GaN FETs switching at 50 kHz, fast voltage transients across the isolation barrier can couple through parasitic capacitance and corrupt data. This part's CMTI rating keeps the output state valid through those edges — a key differentiator from older optocouplers that typically struggle above 10kV/µs. ## Supply rails and channel direction — layout decisions Each side of the isolator has its own supply pin (VDD1 and VDD2), each accepting 2.7V to 5.5V independently. There is no integrated isolated DC-DC converter, so both sides need external power — a separate isolated supply or an external isolator module if the system does not already have isolated rails. The channel direction is fixed: Side 1 has two inputs (channels A and B), Side 2 has one input (channel C). This is a unidirectional device — data flows only in the assigned direction. For bidirectional buses like I2C, you would need two channels (one each way) or an external direction-control circuit.","metaTitle":"ADUM1311ARWZ-RL iCoupler Digital Isolator, 3750Vrms, 1Mbps","metaDescription":"ADUM1311ARWZ-RL general-purpose digital isolator from ADI's iCoupler series.","metaKeywords":null},"attributes":{"series":"iCoupler®","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Digital Isolators"],"specifications":{"Type":"General Purpose","Series":"iCoupler®","Package":"Tape & Reel (TR); Cut Tape (CT)","Data Rate":"1Mbps","Technology":"Magnetic Coupling","Channel Type":"Unidirectional","Mounting Type":"Surface Mount","Isolated Power":"No","Package / Case":"16-SOIC (0.295\\\", 7.50mm Width)","lifecycle_stage":"eol_hot","Voltage - Supply":"2.7V ~ 5.5V","Number of Channels":"3","Voltage - Isolation":"3750Vrms","Operating Temperature":"-40°C ~ 105°C","Inputs - Side 1/Side 2":"2/1","Rise / Fall Time (Typ)":"2.5ns, 2.5ns","Supplier Device Package":"16-SOIC","Pulse Width Distortion (Max)":"40ns","Propagation Delay tpLH / tpHL (Max)":"100ns, 100ns","Common Mode Transient Immunity (Min)":"25kV/µs"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4.95","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$4.95000","currency":"USD"},{"qty":10,"price":"$4.44700","currency":"USD"},{"qty":25,"price":"$4.20400","currency":"USD"},{"qty":100,"price":"$3.64360","currency":"USD"},{"qty":250,"price":"$3.45672","currency":"USD"},{"qty":500,"price":"$3.10172","currency":"USD"},{"qty":1000,"price":"$2.61590","currency":"USD"},{"qty":2000,"price":"$2.48511","currency":"USD"}]},"links":{"datasheetUrl":"https://www.analog.com/media/en/technical-documentation/data-sheets/ADUM1310_1311.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is ADUM1311ARWZ-RL equivalent to ADUM1310?","answer":"The ADUM1310ARWZ-RL is a close sibling but has a different channel direction configuration: it places all three inputs on Side 1 (3/0 split), making it a unidirectional isolator with all channels going the same way. The ADUM1311ARWZ-RL has a 2/1 split (two inputs on Side 1, one on Side 2). Both share the same 3750Vrms isolation, 1Mbps data rate, 100ns propagation delay, and 25kV/µs CMTI. They are not pin-compatible substitutes unless your circuit can tolerate the reversed channel direction."},{"question":"Is ADUM1311ARWZ-RL compatible with 3.3V systems?","answer":"Yes. No level shifter is needed when bridging between these domains."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/ADUM1311ARWZ-RL","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/ADUM1311ARWZ-RL when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}