{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ADIN1110CCPZ-R7","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"ADIN1110CCPZ-R7","canonicalUrl":"https://icboms.com/analog-devices/ADIN1110CCPZ-R7","factsUrl":"https://icboms.com/api/mcp/products/ADIN1110CCPZ-R7","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices ADIN1110CCPZ-R7, Ethernet Transceiver, Full/Half Duplex, 10Mbps, 1/1 Drivers/Receivers, 40-LFCSP (6x6mm), -40°C to 105°C, ROHS3.","salesMarkdown":"## Single-port 10BASE-T transceiver for industrial Ethernet links The ADIN1110CCPZ-R7 from Analog Devices is a single-port Ethernet transceiver supporting 10 Mbps data rate in both full and half-duplex modes. It implements the 10BASE-T physical layer, making it the PHY for any industrial controller, sensor node, or gateway that needs a standard twisted-pair Ethernet connection without stepping up to 100BASE-TX complexity or cost. The part operates across three distinct supply rails: a 1V to 1.2V core supply, a 1.71V to 3.46V I/O supply, and a 3.13V to 3.46V transceiver supply. This split-rail architecture lets the digital interface run at 1.8V or 3.3V logic levels while the PHY analog section stays on a clean 3.3V rail, common in mixed-voltage designs. Rated for -40°C to 105°C ambient, the transceiver suits extended-temperature environments such as outdoor telecom cabinets, factory-floor motor drives, and under-hood automotive Ethernet links where commercial-grade parts would drift out of spec. Packaged in a 40-lead LFCSP with exposed pad (6x6 mm), the footprint requires a thermal via array under the paddle to pull heat into the ground plane. ## Supply rails and power-up sequencing The three supply domains — 1V core, 1.71V–3.46V I/O, and 3.13V–3.46V transceiver — need to be sequenced or co-ramped per the datasheet guidelines. The core rail at 1V is typically generated from the 3.3V input via a local LDO or a small buck converter. A single 3.3V supply with a 1V LDO is the most common BOM arrangement. Because the I/O supply range (1.71V to 3.46V) overlaps the transceiver range, designers can run both from the same 3.3V rail as long as the transceiver supply stays within 3.13V to 3.46V. If the system uses a 1.8V MAC interface, the I/O rail drops to 1.8V while the transceiver rail stays at 3.3V. ## Package and layout checklist The 40-LFCSP (6x6 mm) exposed pad is the primary thermal path. The datasheet recommends a 4x4 array of 0.3 mm thermal vias under the pad, connected to a solid ground plane on the inner layers. Without this via stitch, junction temperature rises quickly above 85°C ambient at full duplex traffic. The part is ROHS3 compliant and rated MSL 3 per the package construction. If the moisture-barrier bag has been open longer than the floor-life window (168 hours at ≤30°C/60% RH), bake the devices at 125°C for 24 hours before reflow. ## Sourcing and lifecycle For smaller builds, the cut-tape option is also listed. No pin-compatible second source exists from another manufacturer; this is a single-sourced ADI part.","metaTitle":"ADIN1110CCPZ-R7 Ethernet Transceiver, 10 Mbps, 40-LFCSP","metaDescription":"ADI ADIN1110CCPZ-R7 single-port 10BASE-T Ethernet transceiver. Full/half duplex, 1.0V core, 3.3V I/O, -40°C to 105°C. Active production, ROHS3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["DC-DC Power Modules"],"specifications":{"Type":"Transceiver","Duplex":"Full, Half","Package":"Tape & Reel (TR); Cut Tape (CT)","Protocol":"Ethernet","Data Rate":"10Mbps","Mounting Type":"Surface Mount","Package / Case":"40-WFQFN Exposed Pad, CSP","lifecycle_stage":"eol_hot","Voltage - Supply":"1V ~ 1.2V, 1.71V ~3.46V, 3.13V ~ 3.46V","Operating Temperature":"-40°C ~ 105°C (TA)","Supplier Device Package":"40-LFCSP (6x6)","Number of Drivers/Receivers":"1/1"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$11.18","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$11.18000","currency":"USD"},{"qty":10,"price":"$10.09700","currency":"USD"},{"qty":25,"price":"$9.62800","currency":"USD"},{"qty":100,"price":"$8.35980","currency":"USD"},{"qty":250,"price":"$7.98404","currency":"USD"},{"qty":750,"price":"$7.27957","currency":"USD"},{"qty":1500,"price":"$6.34027","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/7ec2a1e1cee58d4811df5a2dac021351.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is ADIN1110CCPZ-R7 available in cut tape or just reel?","answer":"The ADIN1110CCPZ-R7 is listed in both Tape & Reel (TR) and Cut Tape (CT) formats. The reel quantity is 1500 pieces per reel; cut tape is available for prototype or low-volume orders."},{"question":"What is the maximum data rate supported by ADIN1110CCPZ-R7?","answer":"The ADIN1110CCPZ-R7 supports a maximum data rate of 10 Mbps in both full and half-duplex modes. It is a 10BASE-T PHY, not a 100BASE-TX or Gigabit part."},{"question":"Is ADIN1110CCPZ-R7 RoHS compliant?","answer":"Yes, the ADIN1110CCPZ-R7 is ROHS3 compliant, meeting the EU RoHS directive without exemptions."},{"question":"Can ADIN1110CCPZ-R7 replace ADIN1110CCPZ?","answer":"The ADIN1110CCPZ-R7 is the same die as the ADIN1110CCPZ; the -R7 suffix indicates Tape & Reel packaging rather than tray or tube. Electrically and functionally they are identical. The R7 variant is the reeled version for automated pick-and-place assembly."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/ADIN1110CCPZ-R7","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/ADIN1110CCPZ-R7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}