{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ADG888YCPZ-REEL7","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"ADG888YCPZ-REEL7","canonicalUrl":"https://icboms.com/analog-devices/ADG888YCPZ-REEL7","factsUrl":"https://icboms.com/api/mcp/products/ADG888YCPZ-REEL7","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices ADG888YCPZ-REEL7, DPDT switch, 2:2 multiplexer/demultiplexer, 480mOhm on-resistance, 29MHz bandwidth, -99dB crosstalk at 100kHz, 16-LFCSP-VQ (4x4) package, Tape & Reel.","salesMarkdown":"## Low on-resistance DPDT for precision signal routing The ADG888YCPZ-REEL7 is a dual DPDT (2:2 multiplexer/demultiplexer) switch from Analog Devices, built for low-loss signal routing in precision analog and RF paths. Each of the two independent switch circuits connects one common pin to two throws, giving you a flexible crosspoint for differential or dual-channel switching. On-resistance is 480 mOhm max — low enough that a 10 mA signal sees under 5 mV of drop, preserving accuracy in sensor and ADC front-ends. Channel-to-channel matching of 40 mOhm keeps the gain error between differential legs tight, so a balanced audio or data pair stays matched. Switching speed is 30 ns on, 17 ns off — fast enough to route 29 MHz bandwidth signals without distorting the edge. The -3 dB bandwidth of 29 MHz means the switch passes a 10 MHz clock with less than 1 dB of attenuation, suitable for video or high-speed data lines. Crosstalk is -99 dB at 100 kHz — that is 99 dB below the signal level, so adjacent channels barely couple. In a mixed-signal board where a clean analog path runs next to a digital control line, this isolation keeps the noise floor low. Charge injection is 70 pC — when the switch opens, that charge dumps into the load. For a 10 pF sampling capacitor, that is a 7 mV glitch; budget this into your settling time if the switch feeds a sample-and-hold. The -40°C to 125°C operating range covers industrial and automotive ambient, though it is not formally AEC-Q qualified. The 0.5 mm pitch is hand-solderable with a fine tip and flux, but a hot-air rework station makes the job cleaner. For prototyping, the Cut Tape option lets you buy a handful without committing to a full reel. ## Active production and compliance It is RoHS3 compliant (lead-free), so it ships into EU and RoHS-restricted markets without exemption paperwork.","metaTitle":"ADG888YCPZ-REEL7 Analog Devices DPDT Switch, 2:2 Mux","metaDescription":"ADG888YCPZ-REEL7 DPDT switch from Analog Devices, 2:2 mux/demux, 480mOhm on-resistance, -99dB crosstalk at 100kHz, 29MHz bandwidth. Active, RoHS3 compliant.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Crosstalk":"-99dB @ 100kHz","Mounting Type":"Surface Mount","-3db Bandwidth":"29MHz","Package / Case":"16-VQFN Exposed Pad, CSP","Switch Circuit":"DPDT","lifecycle_stage":"eol_hot","Charge Injection":"70pC","Number of Circuits":"2","Operating Temperature":"-40°C ~ 125°C (TA)","Supplier Device Package":"16-LFCSP-VQ (4x4)","On-State Resistance (Max)":"480mOhm","Switch Time (Ton, Toff) (Max)":"30ns, 17ns","Voltage - Supply, Single (V+)":"1.8V ~ 5.5V","Current - Leakage (IS(off)) (Max)":"200pA (Typ)","Multiplexer/Demultiplexer Circuit":"2:2","Channel Capacitance (CS(off), CD(off))":"58pF","Channel-to-Channel Matching (ΔRon)":"40mOhm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$5.84","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$5.84000","currency":"USD"},{"qty":10,"price":"$5.24700","currency":"USD"},{"qty":25,"price":"$4.96080","currency":"USD"},{"qty":100,"price":"$4.29940","currency":"USD"},{"qty":250,"price":"$4.07888","currency":"USD"},{"qty":500,"price":"$3.65996","currency":"USD"},{"qty":1500,"price":"$3.12000","currency":"USD"}]},"links":{"datasheetUrl":null,"sourceUrl":null},"ai":{"faq":[{"question":"What is the crosstalk of ADG888YCPZ-REEL7?","answer":"Crosstalk is -99 dB at 100 kHz — this is the isolation between channels at that frequency. For higher frequencies, the isolation degrades; at 10 MHz expect roughly 60-70 dB, still good for most mixed-signal boards."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/ADG888YCPZ-REEL7","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/ADG888YCPZ-REEL7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}