{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ADG707BRUZ","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"ADG707BRUZ","canonicalUrl":"https://icboms.com/analog-devices/ADG707BRUZ","factsUrl":"https://icboms.com/api/mcp/products/ADG707BRUZ","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices ADG707BRUZ, dual 8:1 analog multiplexer/demultiplexer, 4.5 Ohm max on-resistance, 36 MHz -3dB bandwidth, -80 dB crosstalk at 1 MHz, 28-TSSOP package, industrial temperature range.","salesMarkdown":"## Dual 8:1 mux with 4.5 Ohm on-resistance — signal routing for precision analog The Analog Devices ADG707BRUZ is a dual 8:1 analog multiplexer/demultiplexer in a 28-TSSOP package. Each of the two multiplexers routes one of eight inputs to a common output, giving you sixteen analog channels in a single 28-pin footprint. The 4.5 Ohm max on-resistance keeps signal attenuation low — at 10 kOhm load the voltage division is under 0.05%, so you can drive an ADC input directly without a buffer. Crosstalk between channels is rated at -80 dB at 1 MHz, which means a 1 Vpp signal on one channel bleeds less than 100 µV into an adjacent channel — clean enough for 12-bit multiplexed systems and many 16-bit applications if layout is careful. The -3 dB bandwidth of 36 MHz supports video and high-speed data acquisition without significant roll-off below a few MHz. Charge injection is 8 pC, typical for a CMOS mux of this size — you'll see a small glitch on the output when switching channels, but it settles within the 32 ns turn-on time. The 100 pA max off-leakage means you can multiplex high-impedance sensor outputs (like pH probes or photodiodes) without worrying about bias current errors. ## Supply flexibility and temperature range For designs that need to switch signals near the negative rail, the dual-supply option gives you a clean ±2.5 V window.","metaTitle":"ADG707BRUZ Dual 8:1 Analog Multiplexer, 4.5 Ohm, 28-TSSOP","metaDescription":"ADG707BRUZ dual 8:1 analog multiplexer from Analog Devices. 4.5 Ohm on-resistance, -80 dB crosstalk at 1 MHz, 36 MHz bandwidth, 28-TSSOP.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["DC-DC Power Modules"],"specifications":{"Package":"Tube","Crosstalk":"-80dB @ 1MHz","Mounting Type":"Surface Mount","-3db Bandwidth":"36MHz","Package / Case":"28-TSSOP (0.173\\\", 4.40mm Width)","lifecycle_stage":"eol_hot","Charge Injection":"8pC","Number of Circuits":"2","Operating Temperature":"-40°C ~ 85°C (TA)","Supplier Device Package":"28-TSSOP","On-State Resistance (Max)":"4.5Ohm","Voltage - Supply, Dual (V±)":"±2.5V","Switch Time (Ton, Toff) (Max)":"32ns, 16ns (Typ)","Voltage - Supply, Single (V+)":"1.8V ~ 5.5V","Current - Leakage (IS(off)) (Max)":"100pA","Multiplexer/Demultiplexer Circuit":"8:1","Channel Capacitance (CS(off), CD(off))":"13pF, 90pF"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$8.77","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$8.77000","currency":"USD"},{"qty":10,"price":"$7.92600","currency":"USD"},{"qty":25,"price":"$7.55720","currency":"USD"},{"qty":100,"price":"$6.56200","currency":"USD"},{"qty":250,"price":"$6.26704","currency":"USD"},{"qty":500,"price":"$5.71408","currency":"USD"},{"qty":1000,"price":"$4.97678","currency":"USD"}]},"links":{"datasheetUrl":"https://www.analog.com/media/en/technical-documentation/data-sheets/ADG706_707.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the on-resistance of ADG707BRUZ?","answer":"The maximum on-resistance is 4.5 Ohm, specified at 25°C with a 5 V supply. Like any CMOS mux, expect Rds(on) to increase at elevated junction temperature — the datasheet's typical curve shows roughly 6 Ohm at 85°C."},{"question":"What is the equivalent or alternative for ADG707BRUZ?","answer":"The ADG728BRUZ is a single 8:1 mux with similar 4.5 Ohm on-resistance and -75 dB crosstalk at 1 MHz, but it switches slower (95 ns ton) and has lower charge injection (3 pC). The ADG729BRUZ is a dual 4:1 mux (SP4T per channel) in the same package — useful if you need fewer channels per mux. Neither is a pin-for-pin replacement; check the mux topology and timing against your design."},{"question":"What is the crosstalk specification of ADG707BRUZ?","answer":"Crosstalk is rated at -80 dB at 1 MHz. This is the isolation between two channels when one is active — strong enough for 12-bit multiplexed systems and most 16-bit applications with careful PCB layout."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/ADG707BRUZ","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/ADG707BRUZ when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}