{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ADF4106BRUZ-R7","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"ADF4106BRUZ-R7","canonicalUrl":"https://icboms.com/analog-devices/ADF4106BRUZ-R7","factsUrl":"https://icboms.com/api/mcp/products/ADF4106BRUZ-R7","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices ADF4106BRUZ-R7, PLL Clock/Frequency Synthesizer (RF), 6 GHz max, 2.7 V to 3.3 V supply, 16-TSSOP, -40°C to 85°C","salesMarkdown":"## What this PLL synthesizer does in the RF chain The ADF4106BRUZ-R7 is a PLL-based clock/frequency synthesizer from Analog Devices, designed for RF local-oscillator generation up to 6 GHz. It accepts CMOS or TTL reference inputs and outputs a clock signal locked to the reference. The 2:1 input-to-output ratio means one of two reference sources can be selected, useful for redundant or multi-band LO switching. The part does not include an on-chip VCO — it drives an external VCO via the charge-pump output, so the loop filter and VCO must be designed externally. Typical applications include point-to-point microwave radios, satellite LNB downconverters, and test equipment where a low-phase-noise LO up to 6 GHz is needed. The 6 GHz ceiling covers the 5.8 GHz ISM band with margin. The supply range is 2.7 V to 3.3 V — the designer must use a 3.3 V LDO or buck regulator. The charge-pump output voltage swing is limited by the supply, which in turn sets the VCO tuning range. For under-hood or engine-bay use, the 85°C ceiling is a hard limit. The 16-TSSOP package has a 0.173\" body width — a PCB with controlled-impedance traces is recommended for the RF output and reference input. Hand-soldering is possible but requires a fine-tip iron and careful inspection. ## Active production — sourcing posture Both share the same silicon, so a BOM using the tube version can switch to the -R7 reel without requalification.","metaTitle":"ADF4106BRUZ-R7 PLL Clock Synthesizer 6 GHz - Analog Devices","metaDescription":"Active PLL frequency synthesizer from Analog Devices, 6 GHz max, 2.7-3.3 V supply, 16-TSSOP. Industrial temp range -40°C to 85°C. Sourced per RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Clock & Timing ICs"],"specifications":{"PLL":"Yes","Type":"Clock/Frequency Synthesizer (RF)","Input":"CMOS, TTL","Output":"Clock","Package":"Tape & Reel (TR); Cut Tape (CT)","Mounting Type":"Surface Mount","Package / Case":"16-TSSOP (0.173\\\", 4.40mm Width)","Frequency - Max":"6GHz","lifecycle_stage":"eol_hot","Voltage - Supply":"2.7V ~ 3.3V","Divider/Multiplier":"Yes/No","Number of Circuits":"1","Ratio - Input:Output":"2:1","Operating Temperature":"-40°C ~ 85°C","Supplier Device Package":"16-TSSOP","Differential - Input:Output":"Yes/No"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$7.14","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$7.14000","currency":"USD"},{"qty":10,"price":"$6.44900","currency":"USD"},{"qty":25,"price":"$6.14920","currency":"USD"},{"qty":100,"price":"$5.33950","currency":"USD"},{"qty":250,"price":"$5.09948","currency":"USD"},{"qty":500,"price":"$4.64954","currency":"USD"},{"qty":1000,"price":"$4.04960","currency":"USD"},{"qty":2000,"price":"$3.89961","currency":"USD"}]},"links":{"datasheetUrl":"https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4106.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the difference between ADF4106BRUZ and ADF4106BRUZ-R7?","answer":"The ADF4106BRUZ is supplied in a tube, while the -R7 suffix indicates tape-and-reel packaging. The silicon and electrical specifications are identical — the package and pinout are the same 16-TSSOP. A BOM designed for the tube version can use the -R7 reel without any board or firmware change."},{"question":"Can ADF4106BRUZ-R7 be used at 5.8 GHz?","answer":"Yes. The maximum frequency is 6 GHz, which provides margin above the 5.8 GHz ISM band. The PLL will lock at 5.8 GHz provided the external VCO and loop filter are designed for that frequency. The charge-pump output and phase-detector linearity are specified across the full 6 GHz range."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/ADF4106BRUZ-R7","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/ADF4106BRUZ-R7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}