{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ADA4841-1YRZ-R7","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"ADA4841-1YRZ-R7","canonicalUrl":"https://icboms.com/analog-devices/ADA4841-1YRZ-R7","factsUrl":"https://icboms.com/api/mcp/products/ADA4841-1YRZ-R7","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices ADA4841-1YRZ-R7 voltage feedback amplifier, 80 MHz -3dB bandwidth, 13V/µs slew rate, rail-to-rail output, single circuit, 8-SOIC package, Tape & Reel.","salesMarkdown":"## 80 MHz bandwidth, 13 V/µs slew rate — the signal chain bottleneck The ADA4841-1YRZ-R7 is a single-channel voltage feedback amplifier from Analog Devices, with an 80 MHz -3dB bandwidth and a 13 V/µs slew rate. This combination sets the large-signal frequency ceiling: for a 2 Vpp output, the full-power bandwidth is about 1 MHz, so the part is suited for ADC drivers, video buffers, or high-speed filter stages where the signal swing stays within the rail-to-rail output range. The 40 µV typical input offset voltage and 3 µA input bias current keep DC errors low enough for 12-bit acquisition systems without external trimming, though the bias current is higher than a JFET input stage — plan the source impedance accordingly. ## Supply rails and power budget — 2.7 V to 12 V, 1.5 mA per channel Operating from a single supply between 2.7 V and 12 V (or split supplies), the ADA4841-1YRZ-R7 draws 1.5 mA quiescent current per amplifier. This makes it a fit for battery-powered instrumentation where the 80 MHz bandwidth is needed but the power budget is tight — the 1.5 mA supply current is lower than many wideband competitors at this speed. The rail-to-rail output stage swings within 50 mV of each rail at light loads, preserving dynamic range in low-voltage systems. Output current is rated at 60 mA per channel, enough to drive a 50-ohm back-terminated line or a typical ADC input. ## Package and temperature grade — 8-SOIC, -40°C to 125°C Housed in an 8-lead SOIC (0.154-inch body width, 3.90 mm width per the package/case spec), the ADA4841-1YRZ-R7 uses a standard surface-mount footprint. The supplier device package is 8-SOIC, so the land pattern matches the industry-standard SOIC-8 layout — no special thermal pad or exposed paddle to route. Rated for operation from -40°C to 125°C, the amplifier covers the industrial temperature range. This qualifies it for outdoor telecom, automotive cabin, or factory-floor sensor interfaces where ambient temperature swings are wide. ## Active production, RoHS3 compliant — no EOL risk The part is supplied in Tape & Reel (TR) or Cut Tape (CT) options, matching standard pick-and-place feeders.","metaTitle":"ADA4841-1YRZ-R7 Voltage Feedback Op-Amp, 80 MHz","metaDescription":"Analog Devices ADA4841-1YRZ-R7 voltage feedback op-amp, 80 MHz bandwidth, 13 V/µs slew rate, rail-to-rail output, 8-SOIC. Active production, RoHS3 compliant.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"13V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","-3db Bandwidth":"80 MHz","Amplifier Type":"Voltage Feedback","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"1.5mA","Number of Circuits":"1","Current - Input Bias":"3 µA","Operating Temperature":"-40°C ~ 125°C","Voltage - Input Offset":"40 µV","Supplier Device Package":"8-SOIC","Current - Output / Channel":"60 mA","Voltage - Supply Span (Max)":"12 V","Voltage - Supply Span (Min)":"2.7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$5.65","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$5.65000","currency":"USD"},{"qty":10,"price":"$5.07100","currency":"USD"},{"qty":25,"price":"$4.79400","currency":"USD"},{"qty":100,"price":"$4.15470","currency":"USD"},{"qty":250,"price":"$3.94160","currency":"USD"},{"qty":500,"price":"$3.53680","currency":"USD"},{"qty":1000,"price":"$3.01500","currency":"USD"}]},"links":{"datasheetUrl":null,"sourceUrl":null},"ai":{"faq":[{"question":"Is ADA4841-1YRZ-R7 suitable for audio applications?","answer":"The 80 MHz bandwidth and 13 V/µs slew rate are far beyond audio frequencies, so the part can be used in high-speed audio processing or ultrasound, but its input bias current (3 µA) is higher than dedicated audio op-amps — for precision audio front-ends, a lower-bias part may be preferred."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/ADA4841-1YRZ-R7","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/ADA4841-1YRZ-R7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}