{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"AD8574ARUZ-REEL","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"AD8574ARUZ-REEL","canonicalUrl":"https://icboms.com/analog-devices/AD8574ARUZ-REEL","factsUrl":"https://icboms.com/api/mcp/products/AD8574ARUZ-REEL","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices AD8574ARUZ-REEL zero-drift quad op-amp, 1.5 MHz gain bandwidth, 0.4 V/µs slew rate, 1 µV offset, rail-to-rail output, 14-TSSOP surface mount package.","salesMarkdown":"## 1 µV offset eliminates the trim pot The AD8574ARUZ-REEL: Gain-bandwidth product is 1.5 MHz with a slew rate of 0.4 V/µs, which suits DC-accurate sensor conditioning and low-frequency signal chains up to a few tens of kHz; for a 10 kHz sine output at 2 Vpp, the slew rate margin is adequate. Supply current is 850 µA total for all four amplifiers — each channel draws roughly 212 µA, making this a low-power choice for multi-channel data-acquisition systems running on a 2.7 V to 5 V rail. ## Industrial temperature and package fit Rated for -40°C to 125°C operation, the AD8574ARUZ-REEL covers the full industrial temperature band — suitable for outdoor telecom cabinets, engine-bay electronics, or factory-floor sensor modules where ambient heat is a given. Housed in a 14-lead TSSOP package (0.173\" wide, 4.40 mm body), the footprint is compact enough for dense mixed-signal boards. The rail-to-rail output stage swings within 50 mV of each supply rail, preserving headroom in low-voltage 2.7 V systems. Output can source or sink 30 mA per channel — enough to drive a 2.5 V reference into a 10-bit ADC or a small analog meter, but not intended for heavy loads like relays or solenoids. ## Sourcing and lifecycle — no LTB pressure The input bias current is 1 nA typical, which is higher than the picoamp-level bias of some chopper-stabilized competitors — something to verify if the source impedance exceeds 100 kΩ, where the bias current times impedance starts to rival the 1 µV offset.","metaTitle":"AD8574ARUZ-REEL Zero-Drift Op-Amp, 1.5 MHz, 14-TSSOP","metaDescription":"Analog Devices AD8574ARUZ-REEL quad zero-drift op-amp: 1 µV offset, 1.5 MHz GBW, 0.4 V/µs slew, rail-to-rail output, 14-TSSOP. Active, ROHS3 compliant.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"0.4V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"Zero-Drift","Package / Case":"14-TSSOP (0.173\\\", 4.40mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"850µA (x4 Channels)","Number of Circuits":"4","Current - Input Bias":"1 nA","Operating Temperature":"-40°C ~ 125°C","Gain Bandwidth Product":"1.5 MHz","Voltage - Input Offset":"1 µV","Supplier Device Package":"14-TSSOP","Current - Output / Channel":"30 mA","Voltage - Supply Span (Max)":"5 V","Voltage - Supply Span (Min)":"2.7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$11.56","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$11.56000","currency":"USD"},{"qty":10,"price":"$10.44500","currency":"USD"},{"qty":25,"price":"$9.95920","currency":"USD"},{"qty":100,"price":"$8.64740","currency":"USD"},{"qty":250,"price":"$8.25876","currency":"USD"},{"qty":500,"price":"$7.53006","currency":"USD"},{"qty":1000,"price":"$6.55844","currency":"USD"},{"qty":2500,"price":"$6.31553","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/5726b1147e5f93141e8e0f1c8b94eb9e.pdf","sourceUrl":null},"ai":{"faq":[{"question":"How does AD8574ARUZ-REEL compare to the dual-channel AD8572ARZ-REEL?","answer":"The AD8572ARZ-REEL is the dual-channel version of the same zero-drift core — same 1.5 MHz GBW, same 0.4 V/µs slew rate, same 1 µV offset, and same supply range. The AD8574ARUZ-REEL packs four amplifiers in the same 14-TSSOP footprint, so a board designed for the dual part cannot simply drop in a quad without a layout change."},{"question":"What compliance documentation does Analog Devices provide for AD8574ARUZ-REEL?","answer":"The part is ROHS3 compliant. Standard compliance documentation includes the RoHS certificate of compliance and the material declaration; no UL or IEC certification is listed for this op-amp."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/AD8574ARUZ-REEL","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/AD8574ARUZ-REEL when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}