{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"AD744TH","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"AD744TH","canonicalUrl":"https://icboms.com/analog-devices/AD744TH","factsUrl":"https://icboms.com/api/mcp/products/AD744TH","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices AD744TH, JFET op-amp, single circuit, 75 V/µs slew rate, 13 MHz gain bandwidth, 9–36 V supply, TO-99-8 metal can, -55°C to 125°C.","salesMarkdown":"## Fast JFET op-amp in a hermetic can The AD744TH from Analog Devices is a single JFET-input operational amplifier delivering a 75 V/µs slew rate and 13 MHz gain-bandwidth product. It operates from a 9 V to 36 V supply span and draws 3.5 mA quiescent current. The 30 pA input bias current and 250 µV input offset voltage suit precision signal conditioning in high-impedance sensor interfaces. Housed in a TO-99-8 metal can, it is rated for the full military temperature range of -55°C to 125°C, making it a candidate for avionics, satellite, and downhole instrumentation where hermetic sealing and wide thermal margin are required. ## 75 V/µs slew rate — what it means for the signal path The 75 V/µs slew rate is the standout rating on this part. For comparison, the AD712KNZ and AD711JRZ-REEL7 — both JFET op-amps — are spec'd at 20 V/µs. The AD744TH's higher slew rate supports faster settling and larger signal swings at higher frequencies, which matters in waveform generation, fast ADC drivers, or pulse-processing front-ends where the slower sibling would introduce slew-induced distortion. ## Package and temperature grade — deployment reality The TO-99-8 metal can is a through-hole package. It is not a surface-mount footprint, so it requires board holes and manual or wave-solder assembly. The metal can provides a hermetic seal and better thermal dissipation than plastic DIP or SOIC packages. The -55°C to 125°C operating range covers military, aerospace, and industrial extremes — the part is not limited to commercial 0°C to 70°C environments. If your BOM calls for a plastic surface-mount JFET op-amp, the AD711JRZ-REEL7 or AD711KRZ-REEL7 are surface-mount alternatives, but they are rated only 0°C to 70°C and lack the hermetic seal. ## Lifecycle and sourcing The AD744TH carries an active lifecycle status per the manufacturer. It is RoHS non-compliant, so verify your assembly's RoHS exemption or accept the non-compliant status for high-reliability / military contracts where lead-bearing solder is still permitted. The part is sourced through independent distribution and quoted to order against an RFQ.","metaTitle":"AD744TH JFET Op-Amp, 75 V/µs Slew Rate, TO-99-8","metaDescription":"AD744TH JFET op-amp from Analog Devices: 75 V/µs slew rate, 13 MHz GBW, -55°C to 125°C range, TO-99-8 metal can. Active lifecycle, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Bulk","Slew Rate":"75V/µs","Mounting Type":"Through Hole","-3db Bandwidth":"13 MHz","Amplifier Type":"J-FET","Package / Case":"TO-99-8 Metal Can","lifecycle_stage":"eol_hot","Current - Supply":"3.5mA","Number of Circuits":"1","Current - Input Bias":"30 pA","Operating Temperature":"-55°C ~ 125°C","Gain Bandwidth Product":"13 MHz","Voltage - Input Offset":"250 µV","Supplier Device Package":"TO-99-8","Current - Output / Channel":"25 mA","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"9 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$15.66","stockQuantity":0,"priceTiers":[{"qty":20,"price":"$15.66000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/bed7e33c12290362f1e3ce84b159d8b8.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the AD744TH slew rate?","answer":"The AD744TH has a slew rate of 75 V/µs."},{"question":"What is the equivalent of AD744TH?","answer":"The AD712KNZ is a dual JFET op-amp with a 20 V/µs slew rate and 0°C to 70°C range — not a direct pin-for-pin replacement, but a functional alternative in the same JFET family if the higher slew rate and military temperature range are not required. The AD711JRZ-REEL7 and AD711KRZ-REEL7 are single surface-mount JFET op-amps with 20 V/µs slew rate and 0°C to 70°C range."},{"question":"Can AD744TH replace a standard JFET op amp?","answer":"Yes, the AD744TH is a standard JFET op-amp and can replace another single JFET op-amp in a TO-99-8 package, provided the supply voltage (9 V to 36 V), slew rate (75 V/µs), and temperature range (-55°C to 125°C) meet the design requirements."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/AD744TH","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/AD744TH when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}