{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"AD741JN","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"AD741JN","canonicalUrl":"https://icboms.com/analog-devices/AD741JN","factsUrl":"https://icboms.com/api/mcp/products/AD741JN","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices AD741JN, General Purpose Amplifier, 1 Circuit, 8-DIP (0.300\", 7.62mm), Through Hole, 0.5V/µs Slew Rate, 1 MHz -3dB Bandwidth.","salesMarkdown":"## Active production — what that means for a BOM line The AD741JN: It is RoHS non-compliant, which matters for any BOM that requires lead-free assembly — confirm your board's soldering profile and regulatory requirements before committing the line. ## Slew rate and bandwidth — the signal ceiling A 0.5 V/µs slew rate paired with a 1 MHz -3 dB bandwidth sets the large-signal response: a 10 V output step slews in 20 µs, which limits the amplifier to signals below roughly 80 kHz at full swing before slew-induced distortion appears. For small-signal applications the 1 MHz gain-bandwidth product governs the closed-loop gain — a gain-of-10 stage has a 100 kHz small-signal bandwidth, adequate for audio, sensor conditioning, and control loops that do not need fast edge rates. ## Input offset and bias — DC accuracy at the front end The 1 mV typical input offset voltage and 40 nA input bias current are standard for a general-purpose bipolar op-amp — the offset contributes a DC error of 0.04 % at a 2.5 V reference, and the bias current into a 10 kΩ source resistor adds another 400 µV of offset. These figures suit circuits where the signal is in the millivolt range or higher; for microvolt-level front ends the bias current and offset drift over the 0 °C to 70 °C range become the dominant error terms. ## Supply range and output drive — rail headroom matters The 10 V to 44 V supply span means the AD741JN runs on common ±5 V, ±12 V, or ±15 V rails without needing a separate regulator — the 44 V ceiling covers industrial ±15 V supplies with margin. Output current is rated at 25 mA per channel, enough to drive a 600 Ω load to ±10 V swing or to source the input of a successive ADC without an external buffer. ## Package and mounting — board integration The 8-pin DIP (0.300\" width, 7.62 mm row spacing) in a through-hole PDIP-8 package is a breadboard-friendly footprint that drops into standard 0.100\" pitch sockets or solders directly into plated through-holes. Single-circuit (1 op-amp per package) means one AD741JN per signal channel — a dual-channel design needs two devices, whereas a dual op-amp like the AD706JNZ fits the same function in one package. ## Sourcing posture — quoting to order The 2.2 mA supply current per amplifier keeps the thermal budget low in multi-channel boards — no special heatsinking needed even in a densely populated DIP array.","metaTitle":"AD741JN Analog Devices General Purpose Op-Amp, 1 MHz, 8-DIP","metaDescription":"AD741JN general purpose op-amp from Analog Devices, 1 MHz bandwidth, 0.5 V/µs slew rate, 8-DIP through-hole package. Active production, available to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Bulk","Slew Rate":"0.5V/µs","Mounting Type":"Through Hole","-3db Bandwidth":"1 MHz","Amplifier Type":"General Purpose","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"2.2mA","Number of Circuits":"1","Current - Input Bias":"40 nA","Operating Temperature":"0°C ~ 70°C","Voltage - Input Offset":"1 mV","Supplier Device Package":"8-PDIP","Current - Output / Channel":"25 mA","Voltage - Supply Span (Max)":"44 V","Voltage - Supply Span (Min)":"10 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.26","stockQuantity":19,"priceTiers":[{"qty":239,"price":"$1.26000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/9441e2b008e04194ebff6aa82ed504ae.pdf","sourceUrl":null},"ai":{"faq":[{"question":"When sourcing AD741JN, what is the closest functional second-source — AD706JNZ?","answer":"The AD706JNZ is a dual op-amp in the same through-hole DIP footprint, but it runs at a lower 0.15 V/µs slew rate and 800 kHz bandwidth with 50 pA input bias current — it is not a pin-to-pin replacement for the single-channel AD741JN, though the package is the same 8-DIP outline."},{"question":"What compliance documentation does Analog Devices provide for AD741JN?","answer":"The AD741JN is marked RoHS non-compliant by Analog Devices; no UL or IEC certification is listed in the available documentation."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/AD741JN","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/AD741JN when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}