{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"AD707AH","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"AD707AH","canonicalUrl":"https://icboms.com/analog-devices/AD707AH","factsUrl":"https://icboms.com/api/mcp/products/AD707AH","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices AD707AH, General Purpose Amplifier, 1 Circuit, 900 kHz Gain Bandwidth, 0.3 V/µs Slew Rate, 30 µV Input Offset, 2.5 mA Supply, -40°C to 85°C, TO-99-8 Metal Can, Through Hole.","salesMarkdown":"## Precision op amp in a hermetic can The through-hole, hermetically sealed TO-99 package is a differentiator: it offers better moisture resistance and thermal stability than plastic DIP or SOIC, which matters in high-reliability or long-life applications. The 0.3 V/µs slew rate places the AD707AH firmly in the precision camp, not the high-speed one. For a 10 V output step, the settling time is roughly 33 µs — fine for DC or low-frequency AC (< 20 kHz full-power bandwidth), but not for fast ADC drivers or video buffers. The 30 µV input offset, however, is the headline precision metric: it keeps DC errors low without external trimming, which simplifies the BOM in weigh-scale, thermocouple, or strain-gauge circuits. The 2 nA input bias current (typical) is moderate — JFET-input competitors offer picoamp bias, but the AD707AH's bipolar front end delivers lower voltage noise density at low frequencies. ## TO-99-8 — footprint and handling The TO-99-8 metal can is an 8-lead, circular, through-hole package with a 0.200-inch (5.08 mm) pin circle diameter. It is not compatible with DIP-8 layouts — the pin circle is smaller and the leads are arranged radially. The metal case is internally connected to the negative supply (V–) on most ADI op amps in this package; verify against your schematic to avoid inadvertent shorts. The hermetic seal means no moisture-sensitivity level (MSL) bake requirement, a plus for rework or low-volume assembly. The metal can also provides some RF shielding benefit, though it is not specified as a shielded part.","metaTitle":"AD707AH General Purpose Op Amp, 900 kHz, 0.3 V/µs, TO-99-8","metaDescription":"AD707AH precision op amp: 30 µV offset, 0.3 V/µs slew rate, 2.5 mA supply, -40°C to 85°C, TO-99-8 metal can.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Package":"Bulk","Slew Rate":"0.3V/µs","Mounting Type":"Through Hole","Amplifier Type":"General Purpose","Package / Case":"TO-99-8 Metal Can","lifecycle_stage":"eol_hot","Current - Supply":"2.5mA","Number of Circuits":"1","Current - Input Bias":"2 nA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"900 kHz","Voltage - Input Offset":"30 µV","Supplier Device Package":"TO-99-8","Current - Output / Channel":"10 mA","Voltage - Supply Span (Max)":"22 V","Voltage - Supply Span (Min)":"22 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.28","stockQuantity":0,"priceTiers":[{"qty":132,"price":"$2.28000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/a18865c42c14c90a3ca74d20cc42f9d0.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is AD707AH obsolete or end-of-life?","answer":"No."},{"question":"What is the closest functional equivalent to the AD707AH?","answer":"It is not a pin-compatible drop-in — the AD706 is a dual in a DIP-8, while the AD707AH is a single in a TO-99. For a single-channel through-hole replacement, the ADA4004-1ARZ offers 12 MHz bandwidth and 2.7 V/µs slew rate but is surface-mount only. No exact TO-99 pin-compatible second source is listed."},{"question":"What is the AD707AH's listed slew rate?","answer":"The slew rate is 0.3 V/µs, typical. This is a precision op-amp figure, not a high-speed one — expect full-power bandwidth around 4.8 kHz for a 10 V peak-to-peak output swing."},{"question":"Does the AD707AH come in a RoHS-compliant version?","answer":"The AD707AH is listed as RoHS non-compliant. The TO-99 metal can package typically uses tin-lead plating on the leads. If RoHS compliance is required, consider a surface-mount alternative like the ADA4004-1ARZ, which is RoHS-compliant."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/AD707AH","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/AD707AH when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}