{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"AD626ANZ","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"AD626ANZ","canonicalUrl":"https://icboms.com/analog-devices/AD626ANZ","factsUrl":"https://icboms.com/api/mcp/products/AD626ANZ","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices AD626ANZ differential amplifier, 1 circuit, 8-DIP (0.300\", 7.62mm) through-hole package, Tube, 100 kHz -3dB bandwidth, 0.22 V/µs slew rate, 2.4 V to 12 V supply.","salesMarkdown":"## Through-hole differential amp for precision signal conditioning The AD626ANZ is a single-circuit differential amplifier in an 8-pin DIP package (0.300\" body width, 7.62 mm pitch) — the through-hole footprint mates with standard 0.100\" prototyping grids and socket strips, making it a natural fit for breadboard validation or legacy PCB layouts that avoid surface-mount rework. Its differential topology rejects common-mode noise on the input lines, which matters when the signal source is remote from the ADC or controller — think bridge sensors, current-shunt monitors, or any twisted-pair run inside a panel. Supply span runs from 2.4 V single-supply up to ±6 V dual-supply, so the same part works in a 3.3 V microcontroller system or a ±5 V industrial analog front-end. ## Bandwidth and slew rate set the signal ceiling The -3 dB bandwidth of 100 kHz and slew rate of 0.22 V/µs together define the large-signal response: a 5 V peak-to-peak output step slews in about 23 µs, limiting the usable frequency to well below 100 kHz for full-swing signals. Input offset voltage is trimmed to 50 µV typical, which keeps the DC error below 0.01% on a 500 mV shunt signal without external nulling — the 8-DIP package does have offset-null pins (pins 1 and 8) if tighter trim is needed. Output can source or sink 12 mA, enough to drive a 2.5 V reference into a 200 Ω load or feed the input of a successive-approximation ADC without an external buffer. ## Industrial temperature range and active lifecycle Rated for -40°C to +85°C ambient, the AD626ANZ covers the industrial temperature envelope — suitable for factory-floor sensor interfaces, environmental monitoring, and automotive cabin electronics that see under-hood-like thermal cycling. The 1.5 mA quiescent supply current keeps the thermal footprint low in the 8-DIP package — no heatsink needed even at 85°C ambient, as long as the output current stays within the 12 mA rating. ## Board integration and supply routing The 8-DIP package with 0.300\" row spacing fits standard 0.100\" pitch sockets or wave-solder through-hole pads — no special footprint beyond the 8-pin DIP land pattern. Supply decoupling should follow the usual 0.1 µF ceramic close to pins 4 (V-) and 7 (V+) — the 100 kHz bandwidth means the amplifier will amplify power-supply ripple at that frequency, so a low-inductance bypass cap is non-negotiable. Tube packaging (the standard through-hole anti-static tube) delivers 50 parts per tube — no reel or tape, so pick-and-place requires a tube feeder or manual insertion.","metaTitle":"AD626ANZ Differential Amplifier, 8-DIP, 100 kHz, Active","metaDescription":"AD626ANZ differential op-amp in 8-DIP package, 100 kHz bandwidth, 0.22 V/µs slew rate, 50 µV offset. Active production, ROHS3 compliant. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Tube","Slew Rate":"0.22V/µs","Mounting Type":"Through Hole","-3db Bandwidth":"100 kHz","Amplifier Type":"Differential","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"1.5mA","Number of Circuits":"1","Operating Temperature":"-40°C ~ 85°C","Voltage - Input Offset":"50 µV","Supplier Device Package":"8-PDIP","Current - Output / Channel":"12 mA","Voltage - Supply Span (Max)":"12 V","Voltage - Supply Span (Min)":"2.4 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$16.76","stockQuantity":26,"priceTiers":[{"qty":1,"price":"$16.76000","currency":"USD"},{"qty":10,"price":"$15.40500","currency":"USD"},{"qty":25,"price":"$14.76640","currency":"USD"},{"qty":100,"price":"$13.01030","currency":"USD"},{"qty":250,"price":"$12.37180","currency":"USD"},{"qty":500,"price":"$11.57360","currency":"USD"}]},"links":{"datasheetUrl":null,"sourceUrl":null},"ai":{"faq":[{"question":"What is the closest functional alternative to AD626ANZ — AD629ANZ?","answer":"The AD629ANZ is a current-sense amplifier in the same 8-DIP package, but its topology is different: the AD629 is optimized for high-side current sensing with a 200 µV offset and 500 kHz bandwidth, while the AD626ANZ is a general-purpose differential amplifier with 50 µV offset and 100 kHz bandwidth. They are not pin-compatible substitutes — the AD629ANZ has a different pinout and internal gain network. For a drop-in replacement, stick with the AD626ANZ."},{"question":"What compliance documentation does Analog Devices provide for AD626ANZ?","answer":"Analog Devices provides ROHS3 compliance certification (EU Directive 2011/65/EU) for the AD626ANZ. No UL, IEC, or AEC-Q grade is listed in the available documentation. The part carries the standard Analog Devices material declaration and conflict-minerals reporting available through their compliance portal."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/AD626ANZ","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/AD626ANZ when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}