{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"8102306CA","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"8102306CA","canonicalUrl":"https://icboms.com/texas-instruments/8102306CA","factsUrl":"https://icboms.com/api/mcp/products/8102306CA","rawCanonicalId":null},"summary":{"shortDescription":"8102306CA, JFET-input quad operational amplifier, 3 MHz gain bandwidth, 13 V/µs slew rate, 65 pA input bias, 10 V to 30 V supply, -55°C to 125°C, 14-CDIP through-hole package.","salesMarkdown":"## Quad JFET op-amp in a hermetic 14-CDIP The 8102306CA is a quad JFET-input operational amplifier in a 14-lead ceramic DIP (14-CDIP) package. It delivers a 3 MHz gain-bandwidth product and a 13 V/µs slew rate, with a 65 pA input bias current that suits precision, high-impedance signal conditioning. At 13 V/µs, the output can swing 10 V in under 800 ns, which is enough to reproduce a 100 kHz sine wave cleanly at full output. The 3 MHz GBW product means the gain-bandwidth trade-off is typical for a general-purpose JFET op-amp: you can set a gain of 10 and still have a 300 kHz closed-loop bandwidth. If your application needs to track fast transients — say, a current-sense amplifier in a motor drive — the slew rate is the number that keeps the output from slewing into distortion. ## JFET input: low bias, high impedance The 65 pA input bias current is the hallmark of a JFET front end. It lets you use high-value feedback resistors (1 MΩ and up) without the offset voltage drifting with temperature the way a bipolar input would. For photodiode amplifiers, pH probe buffers, or any circuit where the source impedance is in the megaohm range, the JFET input is the right choice. ## Package and temperature: built for the harsh stuff The 14-CDIP (0.300\" body, 7.62 mm width) is a through-hole ceramic package with a hermetic seal. It is the standard for military and aerospace programs that specify MIL-STD-883 screening. The through-hole mounting means it can be socketed — a real advantage for field-service swaps without a hot-air station. ## Supply range and quiescent current The 10 V to 30 V supply span gives you headroom for ±5 V to ±15 V split rails or a single 12 V or 24 V industrial rail. Total quiescent current for all four amplifiers is 1.4 mA (350 µA per channel), which is modest for a quad JFET part — it keeps the self-heating low in the ceramic package, where thermal resistance is higher than in plastic.","metaTitle":"8102306CA JFET Op-Amp, 4-Channel, 13V/µs Slew Rate, 14-CDIP","metaDescription":"8102306CA quad JFET op-amp: 3 MHz GBW, 13V/µs slew rate, 65 pA bias, -55 to 125°C, 14-CDIP hermetic package.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Package":"Bulk","Slew Rate":"13V/µs","Mounting Type":"Through Hole","Amplifier Type":"J-FET","Package / Case":"14-CDIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"1.4mA (x4 Channels)","Number of Circuits":"4","Current - Input Bias":"65 pA","Operating Temperature":"-55°C ~ 125°C (TA)","Gain Bandwidth Product":"3 MHz","Voltage - Input Offset":"3 mV","Supplier Device Package":"14-CDIP","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"10 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$14.53","stockQuantity":0,"priceTiers":[{"qty":21,"price":"$14.53000","currency":"USD"}]},"links":{"datasheetUrl":null,"sourceUrl":null},"ai":{"faq":[{"question":"What is a direct replacement for 8102306CA?","answer":"No direct pin-compatible replacement is listed in the available cross-reference data. The INA4290A2IRGVR is a quad current-sense amplifier with a different input structure and supply range, not a functional substitute. For a JFET quad op-amp in 14-CDIP, the best approach is to verify the pinout against the datasheet and select a part with matching supply voltage, slew rate, and temperature grade."},{"question":"Does 8102306CA have an RoHS compliant version?","answer":"The available specification does not include an RoHS compliance statement. The 14-CDIP ceramic package is typically hermetically sealed with a tin-lead or gold-plated lead finish — confirm the specific lead finish and RoHS status with the supplier at quote time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/8102306CA","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/8102306CA when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}