{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6N139TVM","brand":"onsemi","brandSlug":"onsemi","productSlug":"6N139TVM","canonicalUrl":"https://icboms.com/onsemi/6N139TVM","factsUrl":"https://icboms.com/api/mcp/products/6N139TVM","rawCanonicalId":null},"summary":{"shortDescription":"onsemi 6N139 series single-channel optoisolator, Darlington with base output, 5000Vrms isolation, 500% min CTR at 1.6mA, through-hole 8-DIP (0.400\", 10.16mm), tube.","salesMarkdown":"## Isolation and drive margin for industrial signal separation The 6N139TVM: Rated for 5000Vrms isolation, this optoisolator provides a reinforced barrier between low-voltage control logic and higher-voltage field circuits — enough margin for IEC 60950-1 basic insulation in mains-connected equipment. The Darlington output stage delivers a minimum current transfer ratio of 500% at just 1.6 mA forward current, so a weak logic output (like a 3.3V GPIO driving through a series resistor) can still switch the output transistor into saturation without an external buffer. ## Switching speed and output drive for digital interfaces Typical turn-on time is 240 ns and turn-off is 1.3 µs — this part is suited for low-to-medium speed digital isolation (baud rates up to a few hundred kHz) rather than high-speed data links like CAN or RS-485. ## Package and board-fit for through-hole assembly Housed in a standard 8-DIP (0.400-inch row spacing, 10.16 mm body width), the through-hole package mates with 0.100-inch pitch sockets or wave-solder pads — no special footprint beyond the usual 0.025-inch round holes. The 8-MDIP supplier package variant (EIAJ-compliant) shares the same pinout and footprint as the standard DIP-8, so a single PCB layout covers both. No stock-holding claim — each order is validated against the latest factory lead time.","metaTitle":"onsemi 6N139TVM Optoisolator, Darlington Output, 5000Vrms","metaDescription":"onsemi 6N139TVM single-channel optoisolator with Darlington output, 5000Vrms isolation, 500% min CTR at 1.6mA. Active production, through-hole DIP-8.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Optoisolators"],"specifications":{"Mfr":"onsemi","Series":"-","Package":"Tube","Input Type":"DC","Output Type":"Darlington with Base","Mounting Type":"Through Hole","Package / Case":"8-DIP (0.400\\\", 10.16mm)","Product Status":"Active","lifecycle_stage":"eol_hot","Number of Channels":"1","Base Product Number":"6N139","Voltage - Isolation":"5000Vrms","Vce Saturation (Max)":"-","Operating Temperature":"-40°C ~ 100°C","Rise / Fall Time (Typ)":"-","Voltage - Output (Max)":"18V","Supplier Device Package":"8-MDIP","Current - Output / Channel":"60mA","Current Transfer Ratio (Max)":"-","Current Transfer Ratio (Min)":"500% @ 1.6mA","Voltage - Forward (Vf) (Typ)":"1.3V","Turn On / Turn Off Time (Typ)":"240ns, 1.3µs","Current - DC Forward (If) (Max)":"20 mA"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.9500","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/646a30e661680f909facce39eb3cee6c.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the input type and output configuration?","answer":"The input is DC-driven (LED), and the output is a Darlington transistor with base access, allowing external bias or speed-up components. Single channel."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/onsemi/6N139TVM","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/onsemi/6N139TVM when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}