{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"5KP150CA_R2_00001","brand":"Panjit International Inc.","brandSlug":"panjit-international-inc","productSlug":"5KP150CA_R2_00001","canonicalUrl":"https://icboms.com/panjit-international-inc/5KP150CA_R2_00001","factsUrl":"https://icboms.com/api/mcp/products/5KP150CA_R2_00001","rawCanonicalId":null},"summary":{"shortDescription":"Panjit International Inc. 5KP TVS Zener, 5KP150CA_R2_00001, 150V reverse standoff, 243V max clamping, 5kW peak pulse, 21A, P600 axial, through-hole.","salesMarkdown":"## Axial TVS Zener in the 5KP series The 5KP150CA_R2_00001 is a unidirectional (single bidirectional channel) TVS Zener in the P600 axial package — the through-hole footprint mounts directly into a board hole pattern, not a surface-pad footprint. The P600 body is the industry-standard outline for 5 kW rated TVS diodes, which means the board designer routes the cathode stripe band to the protected rail and the anode end to common ground. At 175 °C maximum junction temperature, this part is rated for the hotter end of industrial and power-supply environments without derating to zero. ## Clamping performance at 5 kW peak pulse That 243 V ceiling is the number that matters for downstream semiconductors — any transients clamped to 243 V or below leave the downstream rail safe. The 5 kW peak pulse rating gives this part enough energy handling to survive a 10/1000 µs surge event once, and the repeat-pulse capability follows the datasheet derating curve. For a 150 V rail, the standoff provides a comfortable margin — the part stays off until a spike pushes it past 167 V breakdown, then clamps hard at 243 V. ## General-purpose TVS Zener — where it fits Classified for general-purpose use, not power-line protection, which means this part belongs in a board-level secondary suppression role — protecting control logic, op-amp rails, or downstream regulator inputs from transient spikes that couple onto the signal or power bus. The -55 to 175 °C junction temperature range makes it viable for equipment that sees wide ambient swings, including outdoor enclosures and motor-drive compartments. ## Packaging and family anchoring The base product number 5KP150 anchors this to a family of 150 V standoff parts in the same 5 kW package, so second-source candidates typically carry the same base number with a different date-code or a different manufacturer's suffix.","metaTitle":"5KP150CA_R2_00001 Panjit 5KP150CA R2, 5kW TVS Zener","metaDescription":"Panjit 5KP150CA_R2_00001 axial TVS Zener, 150V standoff, 243V clamping, 5kW peak pulse, -55 to 175°C. Active status. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Circuit Protection"],"specifications":{"Mfr":"Panjit International Inc.","Type":"Zener","Series":"5KP","Package":"Tape & Reel (TR) Cut Tape (CT)","Applications":"General Purpose","Mounting Type":"Through Hole","Package / Case":"P600, Axial","Product Status":"Active","lifecycle_stage":"unknown","Power - Peak Pulse":"5000W (5kW)","Base Product Number":"5KP150","Operating Temperature":"-55°C ~ 175°C (TJ)","Power Line Protection":"No","Bidirectional Channels":"1","Capacitance @ Frequency":"-","Supplier Device Package":"P600","Voltage - Breakdown (Min)":"167V","Voltage - Clamping (Max) @ Ipp":"243V","Voltage - Reverse Standoff (Typ)":"150V","Current - Peak Pulse (10/1000µs)":"21A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.7695","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/28cf74380ef8422fa985df275f081ba3.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Where can I source 5KP150CA_R2_00001 and what is the typical lead time?","answer":"Sourced through independent distribution as a quoted-to-order line. The Tape & Reel and Cut Tape packaging options cover both high-volume insertion and prototype-build runs. Availability and lead time are confirmed when you submit an RFQ with your required quantity and target date."},{"question":"What is the key clamping spec for 5KP150CA_R2_00001 on a 150 V rail?","answer":"The part stays off below 150 V standoff, breaks down at a minimum of 167 V, and clamps at a maximum of 243 V when a 21 A 10/1000 µs surge hits — meaning downstream semiconductors on that rail see 243 V or less, well below the breakdown voltage of most downstream silicon."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/panjit-international-inc/5KP150CA_R2_00001","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/panjit-international-inc/5KP150CA_R2_00001 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}