{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"5962-9080801MHA","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"5962-9080801MHA","canonicalUrl":"https://icboms.com/texas-instruments/5962-9080801MHA","factsUrl":"https://icboms.com/api/mcp/products/5962-9080801MHA","rawCanonicalId":null},"summary":{"shortDescription":"5962-9080801MHA, JFET-input dual operational amplifier, 2 MHz gain bandwidth, 3.4 V/µs slew rate, 625 µA supply per channel, 7 V to 36 V supply range, -55°C to 125°C, 10-CDFP ceramic package.","salesMarkdown":"## JFET input stage — what it buys the signal chain The 5962-9080801MHA is a JFET-input dual operational amplifier from the 5962-9080801 series, built for precision analog signal conditioning where input bias current must stay in the picoamp range. With an input bias current of 4 pA and a 2 MHz gain-bandwidth product, this part suits photodiode amplifiers, charge integrators, and high-impedance sensor interfaces that would be degraded by the nanoamp-level bias of a bipolar op-amp. The 3.4 V/µs slew rate supports output swings up to roughly 10 V peak-to-peak at 54 kHz before slew-rate limiting begins — adequate for audio-band and slow industrial sensor signals, but not for video or fast ADC drivers. ## Supply rails and temperature — the design envelope This op-amp operates from a 7 V minimum to a 36 V maximum supply span, which means it requires a split supply of at least ±3.5 V or a single rail of 7 V or higher. The 10-CDFP (ceramic dual flatpack) package is hermetic, making it suitable for high-reliability and sealed-environment deployments where plastic packages would be at risk of moisture ingress or outgassing. ## Dual channel, 80 mA output — driving loads and saving board space Two circuits in one 10-lead ceramic package (10-CDFP) save board area compared to two single op-amps, while each channel can deliver up to 80 mA of output current. That output drive is enough to swing into a 200 Ω load at 10 V, or drive a moderate cable capacitance without an external buffer. Supply current is 625 µA per channel, totalling 1.25 mA for the dual — a reasonable quiescent draw for a precision JFET part, though not as frugal as modern CMOS rail-to-rail alternatives running under 200 µA per channel. ## Package and footprint — the ceramic reality The 10-CDFP (ceramic dual flatpack) is a surface-mount package with gull-wing leads, specified for surface-mount assembly. Unlike plastic packages that carry MSL ratings and require bake before reflow if moisture-exposed, ceramic packages are inherently moisture-resistant — no bake step needed for storage. The listing shows the shipping medium as Bulk, meaning loose devices in an anti-static tube or tray rather than tape-and-reel; for automated pick-and-place, you will need to transfer to a feeder-compatible carrier or order a tape-and-reel variant if one exists. ## Lifecycle and compliance It is listed as RoHS non-compliant, which is expected for a hermetic ceramic military-grade part — these are typically exempt from RoHS due to the lead-bearing solder finish required for high-reliability solder joints. For designs that require RoHS compliance, a tin-plated commercial equivalent would be needed, but the military temperature range and JFET input stage are rarely available in a fully RoHS-compliant ceramic package.","metaTitle":"5962-9080801MHA JFET Op-Amp, Dual, 2 MHz, 3.4 V/µs","metaDescription":"5962-9080801MHA JFET-input dual op-amp in 10-CDFP package. 2 MHz GBW, 3.4 V/µs slew rate, 625 µA per channel, 7-36 V supply, -55 to 125°C.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Package":"Bulk","Slew Rate":"3.4V/µs","Mounting Type":"Surface Mount","Amplifier Type":"J-FET","Package / Case":"10-CDFF","lifecycle_stage":"eol_hot","Current - Supply":"625µA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"4 pA","Operating Temperature":"-55°C ~ 125°C (TA)","Gain Bandwidth Product":"2 MHz","Voltage - Input Offset":"900 µV","Supplier Device Package":"10-CFP","Current - Output / Channel":"80 mA","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$19.04","stockQuantity":0,"priceTiers":[{"qty":16,"price":"$19.04000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/fffb12122bcbef40070ea56eeed541d8.pdf","sourceUrl":null},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/5962-9080801MHA","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/5962-9080801MHA when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}