{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"5962-0051202QPA","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"5962-0051202QPA","canonicalUrl":"https://icboms.com/texas-instruments/5962-0051202QPA","factsUrl":"https://icboms.com/api/mcp/products/5962-0051202QPA","rawCanonicalId":null},"summary":{"shortDescription":"Quad general-purpose op-amp, 6.4 MHz gain bandwidth, 1.6 V/µs slew rate, rail-to-rail output, 2.7 V to 6 V supply, 550 µA per channel, -55°C to 125°C, 8-CDIP (0.300\", 7.62 mm), AEC-Q100 qualified.","salesMarkdown":"## Quad op-amp in a hermetic CDIP — why this package matters The 5962-0051202QPA is a quad general-purpose operational amplifier from the Automotive, AEC-Q100 series, housed in an 8-CDIP ceramic dual-in-line package. Each channel draws 550 µA supply current, making it suitable for multi-channel signal conditioning in power-constrained, high-reliability systems. ## 6.4 MHz GBW and 1.6 V/µs slew rate — bandwidth budget The 6.4 MHz gain-bandwidth product supports unity-gain stable operation for audio-frequency filters, sensor amplifiers, and control-loop compensation. The 1.6 V/µs slew rate limits large-signal bandwidth to roughly 100 kHz at 10 V p-p output, which is adequate for most industrial sensor interfaces and actuator drives. For higher-speed applications above 500 kHz, a faster op-amp like the TLV9362IDDFR (10.6 MHz, 25 V/µs) would be a better fit, but the 5962-0051202QPA's hermetic package and temperature range are not available in that family. ## AEC-Q100 and military temperature range The AEC-Q100 qualification (Automotive, AEC-Q100 series) means this part has passed the stress tests required for automotive-grade ICs: extended temperature cycling, high-temperature operating life, and ESD robustness. The 8-CDIP package is hermetically sealed, preventing moisture ingress and corrosion in high-humidity or condensing environments. ## Quad-channel, 550 µA per amplifier — power budget Four amplifiers in a single 8-pin package at 550 µA each (2.2 mA total) keeps the analog power budget lean for multi-channel data acquisition or control systems. The 1.3 nA input bias current and 500 µV input offset voltage are typical for a general-purpose bipolar op-amp; for precision applications below 100 µV offset, a zero-drift amplifier would be required. ## RoHS non-compliant — a sourcing consideration The 5962-0051202QPA is listed as RoHS non-compliant, which is expected for a hermetic ceramic package that uses lead-based solder seals and lead-frame finishes. This part is exempt from RoHS restrictions for high-reliability applications (military, aerospace) under current EU exemptions. For designs that require RoHS compliance, a surface-mount plastic-packaged quad op-amp such as the OPA4374AIPWT (6.5 MHz, 5 V/µs, CMOS, RoHS) could be considered, but it lacks the hermetic seal and military temperature range.","metaTitle":"5962-0051202QPA Quad Op-Amp, 6.4 MHz, AEC-Q100, CDIP","metaDescription":"5962-0051202QPA quad general-purpose op-amp, 6.4 MHz GBW, 1.6 V/µs slew rate, rail-to-rail output, -55°C to 125°C, 8-CDIP. AEC-Q100 qualified.","metaKeywords":null},"attributes":{"series":"Automotive, AEC-Q100","packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Series":"Automotive, AEC-Q100","Package":"Bulk","Slew Rate":"1.6V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Through Hole","Amplifier Type":"General Purpose","Package / Case":"8-CDIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"550µA (x4 Channels)","Number of Circuits":"4","Current - Input Bias":"1.3 nA","Operating Temperature":"-55°C ~ 125°C (TA)","Gain Bandwidth Product":"6.4 MHz","Voltage - Input Offset":"500 µV","Supplier Device Package":"8-CDIP","Current - Output / Channel":"80 mA","Voltage - Supply Span (Max)":"6 V","Voltage - Supply Span (Min)":"2.7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$21.03","stockQuantity":0,"priceTiers":[{"qty":15,"price":"$21.03000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/7d7eb6d98e4a8eb6d49eada29648e271.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is 5962-0051202QPA RoHS compliant?","answer":"No, it is listed as RoHS non-compliant, which is standard for hermetic ceramic CDIP packages that use lead-based seals."},{"question":"What is the equivalent or replacement for 5962-0051202QPA?","answer":"No direct pin-compatible replacement is listed. For single- or dual-channel alternatives, the TLV9351IDCKR (3.5 MHz) and TLV9362IDDFR (10.6 MHz) are options, but a board redesign is needed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/5962-0051202QPA","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/5962-0051202QPA when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}