{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"11LC010T-I/MNY","brand":"Microchip Technology","brandSlug":"microchip","productSlug":"11LC010T-I-MNY","canonicalUrl":"https://icboms.com/microchip/11LC010T-I-MNY","factsUrl":"https://icboms.com/api/mcp/products/11LC010T-I%2FMNY","rawCanonicalId":null},"summary":{"shortDescription":"Microchip 11LC010T-I/MNY, 1Kbit EEPROM, Non-Volatile, Single Wire interface, 100 kHz, 2.5V ~ 5.5V, -40°C ~ 85°C, 8-WFDFN Exposed Pad, 8-TDFN (2x3).","salesMarkdown":"## Single-wire EEPROM for tight-pin-count designs The Microchip 11LC010T-I/MNY is a 1 Kbit serial EEPROM that communicates over a single-wire interface, freeing up GPIO pins on microcontrollers where every I/O counts. ## Single-wire vs I²C — what the interface means for your BOM Unlike the I²C-based 24LC01BHT-I/MNY, which needs two bus lines (SCL + SDA) plus pull-up resistors, the 11LC010T-I/MNY uses a single data line. That saves one GPIO and one resistor per device, which matters when you're squeezing a config store into a 6-pin MCU or a sensor module with no spare pins. The trade-off is a lower clock rate — 100 kHz versus 400 kHz on the I²C sibling — so it's fine for occasional reads of calibration data or serial numbers, but not for streaming logs. ## Package and footprint — 8-TDFN (2x3 mm) Housed in an 8-WFDFN exposed-pad package (supplier device package 8-TDFN, 2x3 mm), this part is surface-mount only. Hand-soldering is possible with a fine-tip iron and flux, but a hot-air station or reflow profile is more reliable for the small pad pitch.","metaTitle":"Microchip 11LC010T-I/MNY 1Kbit EEPROM, Single Wire, 8-TDFN","metaDescription":"Microchip 11LC010T-I/MNY 1Kbit EEPROM with single-wire interface, 2.5V-5.5V supply, -40°C to +85°C. 8-TDFN package.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Technology":"EEPROM","Memory Size":"1Kbit","Memory Type":"Non-Volatile","Memory Format":"EEPROM","Mounting Type":"Surface Mount","Package / Case":"8-WFDFN Exposed Pad","Clock Frequency":"100 kHz","lifecycle_stage":"eol_hot","Memory Interface":"Single Wire","Voltage - Supply":"2.5V ~ 5.5V","Memory Organization":"128 x 8","Operating Temperature":"-40°C ~ 85°C (TA)","Supplier Device Package":"8-TDFN (2x3)","Write Cycle Time - Word, Page":"5ms"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.29","priceTiers":[{"qty":1,"price":"$0.29000","currency":"USD"},{"qty":25,"price":"$0.28000","currency":"USD"},{"qty":100,"price":"$0.26000","currency":"USD"},{"qty":3300,"price":"$0.31500","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/7e0bb80ac6f9ae234873f64c6baf4f4d.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/11LC010T-I%2FMNY/alternatives.json"},"ai":{"faq":[{"question":"Can 11LC010T-I/MNY be used as a replacement for 11LC010T-I/SN?","answer":"The 11LC010T-I/MNY is the same die in a different package — 8-TDFN (2x3 mm) versus the SOIC-8 of the /SN variant. Electrically identical, but the footprint and soldering profile differ."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/microchip/11LC010T-I-MNY","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/microchip/11LC010T-I-MNY when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-20T14:34:45.345Z","lastPublished":"2026-07-20T14:34:45.345Z","indexable":true}}