{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"1.5SMCJ75","brand":"Diotec Semiconductor","brandSlug":"diotec-semiconductor","productSlug":"1.5SMCJ75","canonicalUrl":"https://icboms.com/diotec-semiconductor/1.5SMCJ75","factsUrl":"https://icboms.com/api/mcp/products/1.5SMCJ75","rawCanonicalId":null},"summary":{"shortDescription":"Diotec Semiconductor Zener TVS diode, 1.5SMCJ75, unidirectional 1-channel, 75V reverse standoff, 83.3V breakdown, 134V clamping @ 11.2A, 1500W peak pulse, -50°C to 150°C junction, SMC/DO-214AB surface mount.","salesMarkdown":"## What the voltage-clamping chain means for your rail The 1.5SMCJ75: The standoff rating sets the working rail — 75V is the maximum continuous reverse voltage the diode blocks in normal operation. Once a transient exceeds the 83.3V breakdown threshold, the device clamps the overvoltage to 134V, limiting what reaches the downstream circuitry. That 134V ceiling is the clamping spec the protected side sees during a surge event. ## 1.5kW peak pulse and the transient event reality The 1500W peak pulse rating defines the device's energy-handling ceiling for a single 10/1000 µs transients — this is the industry-standard 10/1000 µs waveform (10% peak amplitude, 1000 µs duration) used to rate TVS diodes for AC-line and DC-rail protection. At 11.2A peak pulse current, the diode dissipates the surge energy by clamping, and the clamping voltage of 134V is the stress voltage the protected load sees during that event. For a 24V or 48V DC rail, the 75V standoff gives comfortable headroom above the nominal rail while keeping the breakdown and clamping points well below what the downstream semiconductors can tolerate. ## Junction temperature range and unidirectional topology Being unidirectional (one direction of clamping), it only protects the forward-bias path for positive transients; AC or bidirectional protection requires a back-to-back TVS configuration. The datasheet confirms it is not rated as a power-line protection device, so it is suited for signal-line and DC-rail transient suppression on board, not for direct AC mains clamping. ## SMC/DO-214AB package — surface-mount board protection The SMC/DO-214AB package is the standard JEDEC surface-mount package for TVS diodes in the 1.5kW class — it mounts directly to the PCB with standard reflow or wave-solder assembly and the cathode bar connects to the plane being protected. The strip packaging variant is a tray or tube option rather than tape-and-reel, which is typical for high-volume OEM assembly; confirm the assembly handling alignment with your pick-and-place tooling. The package thermal impedance is governed by the PCB pad design, so adequate copper fill under the cathode pad is required to keep the junction temperature within the 150°C limit during a high-energy transient event.","metaTitle":"1.5SMCJ75 TVS Diode, 75V Standoff, 1.5kW Peak","metaDescription":"Diotec 1.5SMCJ75 unidirectional TVS diode, 75V standoff, 134V clamping, 1.5kW peak pulse. Active status. Surface mount SMC/DO-214AB. Order to quote.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Circuit Protection"],"specifications":{"Mfr":"Diotec Semiconductor","Type":"Zener","Series":"-","Package":"Strip","Applications":"General Purpose","Mounting Type":"Surface Mount","Package / Case":"DO-214AB, SMC","Product Status":"Active","lifecycle_stage":"unknown","Power - Peak Pulse":"1500W (1.5kW)","Operating Temperature":"-50°C~150°C(TJ)","Power Line Protection":"No","Capacitance @ Frequency":"-","Supplier Device Package":"SMC/DO-214AB","Unidirectional Channels":"1","Voltage - Breakdown (Min)":"83.3V","Voltage - Clamping (Max) @ Ipp":"134V","Voltage - Reverse Standoff (Typ)":"75V","Current - Peak Pulse (10/1000µs)":"11.2A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.9158","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/3fb0502b23c3703cafef426b7b2bf7e5.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is the 1.5SMCJ75 available via RFQ confirmation and what is the lead time?","answer":"No live stock position is asserted on this page. For urgent requirements, specify the full BOM quantity and required date in the quote request."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/diotec-semiconductor/1.5SMCJ75","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/diotec-semiconductor/1.5SMCJ75 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}